Visit http://support.yealink.com/ or scan the QR code to obtain the latest support information. W59R DECT IP Phone Quick Start Guide Receiver 1 2 Power LED Indicator 3 Phone Screen 4 5 9 Soft Keys Message Key 7 Navigation Keys On-hook Key/Power Key 11 Keypad Soft Keys 4 6 Speakerphone Key OK Key 8 Off-hook Key 10 TRAN Key 12 13 Mute Key 14 Microphone Speaker 15 16 Volume Key +/-
Copyright2020 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.All rights reserved. For W59R firmware: 115.83.254.20 or later Package Contents W59R Handset Charging Cradle Power Adapter Battery Cover Rechargeable Battery Decorative Cover Quick Start Guide We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance. Assembling W59R 1. Insert the battery into the handset. 2. (Optional) Mount the charging cradle to the wall. 50mm 50mm 3. Connect the charging cradle and charge the handset. Use Yealink-supplied power adapter (5V/600mA). A third-party power adapter may damage the handset. Check the charging status on the top-right corner of the LCD screen. Technical Specifications Item Specification Frequency band 1880-1900 MHz (Europe), 1920-1930 MHz (Ameri-
Battery type ca), 1910-1920 MHZ (Brazil) 1460mAh Lithium-ion 3.7v 5.4WH Talk time 28hours/24hours(with bluetooth) Standby time 360 hours (15 days)/240 hours(with bluetooth) Charging time Less than 4 hours Charger DC 5V/600mA Input Power adapter Input:100-240V~50/60Hz 0.2A Output:5V 0.6A Security IEC 62133-2:2017 For more information, see the specific user guide or contact your system administrator. Regulatory Notices Operating Ambient Temperatures Operating temperature: +32 to 104F (0 to 40C) Relative humidity: 5% to 90%, noncondensing Storage temperature: -22 to +160F (-30 to +70C) Warranty Our product warranty is limited only to the unit itself, when used normally in accor-
dance with the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product, or for any claim from a third party. We are not liable for problems with Yealink device arising from the use of this product; we are not liable for financial damages, lost profits, claims from third parties, etc., arising from the use of this product. Explanation of the symbols DC symbol is the DC voltage symbol. WEEE Warning symbol To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Restriction of Hazardous Substances Directive (RoHS) This device complies with the requirements of the EU RoHS Directive. Statements of compliance can be obtained by contacting support@yealink.com. Safety Instructions Save these instructions. Read these safety instructions before use!
General Requirements Before you install and use the device, read the safety instructions carefully and observe the situation during operation. During the process of storage, transportation, and operation, please always keep the device dry and clean, avoid collision and crash. Please attempt not to dismantle the device by yourself. In case of any dis-
crepancy, please contact the appointed maintenance center for repair. Please refer to the relevant laws and statutes while using the device. Legal rights of others should be respected as well. Environmental Requirements Place the device at a well-ventilated place. Do not expose the device under direct sunlight. Keep the device dry and free of dusts. Do not place the device on or near any inflammable or fire-vulnerable object, such as rubber-made materials. Keep the device away from any heat source or bare fire, such as a candle or an electric heater. Operating Requirements Do not let a child operate the device without guidance. Do not let a child play with the device or any accessory in case of accidental swallowing. Please use the accessories provided or authorized by the manufacturer only. The power supply of the device shall meet the requirements of the input voltage of the device. Please use the provided surge protection power socket only. Before plugging or unplugging any cable, make sure that your hands are completely dry. Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub, washbowl, kitchen sink, wet basement or near a swimming pool. During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike. If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug. When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the power supply, and unplug the power plug immediately. Contact the specified maintenance center for repair. Do not insert any object into equipment slots that is not part of the product or auxiliary product. Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the grounding cable until you disconnect all other cables. WARNGING: Do not place any small or light metallic object near the earcap region. Battery Requirements Do not immerse the battery into water, which could short-circuit and damage Do not expose the battery to an open flame or leave the battery where it could be subjected to extremely high temperatures, which could cause the battery to explode. Do power the handset off before removing the battery. Do not try to use the battery for the power supply of any device other than the battery. this handset. Do not open or mutilate the battery, released electrolyte is corrosive and may cause damage to your eyes or skin. Use only the rechargeable battery pack delivered with the handset or those rechargeable battery packs expressly recommended by Yealink. Defective or exhausted battery should never be disposed of as municipal waste. Return old battery to the battery supplier, a licensed battery dealer or a designated collection facility. Cleaning Requirements Before cleaning the device, disconnect it from the power supply. Use a piece of soft, dry and anti-static cloth to clean the device. Keep the power plug clean and dry. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC ID:T2C-W59R IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) Lappareil ne doit pas produire de brouillage;
2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement 2.This device meets CS03 Part V. This device meets the applicable Innovation, Science and Economic Development Canada technical specifications. / Ce produit rpond la innovation, des sciences et de .Dveloppement conomique Canada spcifications techniques applicables. Radiation Exposure Statement This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps quau-
cune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. Contact Information YEALINK NETWORK TECHNOLOGY CO.,LTD. 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C YEALINK (EUROPE) NETWORK TECHNOLOGY B.V. Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Nether-
lands YEALINK (USA) NETWORK TECHNOLOGY CO., LTD. 999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA Made in China