FCC ID: 2BFVP-SAMH01 WIRELESS GAMING MOUSE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure statement The device has been evaluatec to meel general RF exposure requirement. The device can be used in porlable exposure condition without restriction.

C5266091_X24_Ed.2 Attestation Statements that prohibit equipment authorization TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Renmo Electronic Technology Co., Ltd Grantee code: 2BFVP FCC ID: 2BFVP-SAMH01 FRN: 0035281047 Contact Name: Jack bu Address: Room404-406,Building2,Sanhelnternational,LaiwushanNewVillage, DalangStreet, Longhua District,Shenzhen city Telephone: 18906679427 E-mail: 986250419@qq.com Fax: 18906679427 i. ii.

[Shenzhen Renmo Electronic Technology Co., Ltd] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Shenzhen Renmo Electronic Technology Co., Ltd] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification.

[Shenzhen Renmo Electronic Technology Co., Ltd] (the applicant) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing coveredequipment . Date: 2024/04/13 Applicants Name: Jack bu Title: Manager Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

Shenzhen Renmo Electronic Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-04-13 Subject: Request for Confidentiality FCC ID: 2BFVP-SAMH01 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality Short-Term Confidentiality NOTE 2 No No No No No No No No No No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Jack bu Title: Manager Date: 2024-04-13 Signature of applicant:

1/1

Shenzhen Renmo Electronic Technology Co., Ltd Letter of Authorization Company: Shenzhen Renmo Electronic Technology Co., Ltd Address: Room404-406,Building2,Sanhelnternational,LaiwushanNewVillage, DalangStreet, Longhua District,Shenzhen city Product Name: WIRELESS GAMING MOUSE Model Number: SA-MH01 FCC Identifier: 2BFVP-SAMH01 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jack bu Title: Manager Date: 2024-04-13 Signature of applicant:

1/1

US Agent for Service of Process LETTER OF ATTESTATION

+1-716-965-5112 Wilson.Cheung.FDA@qmail.com TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: Wilson Tech Service LLC FRN: 0033402033 Contact Name: Wilson Cheung Address: 1312 17th Street Suite692DenverCO80202.US Telephone No:

Email:

Applicant:

Company name: Shenzhen Renmo Electronic Technology Co., Ltd Grantee code: 2BFVP FCC ID: 2BFVP-SAMH01 FRN: 0035281047 Contact Name: Jack bu Address: Room404-406,Building2,Sanhelnternational,LaiwushanNewVillage, DalangStreet, Longhua District,Shenzhen city Telephone: 18906679427

[Shenzhen Renmo Electronic Technology Co., Ltd] certifies that, as of the date of this filing of the application with the TCB, [Wilson Tech Service LLC] is our designated US agent ID.

[Shenzhen Renmo Electronic Technology Co., Ltd] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment.

[Wilson Tech Service LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Date: 2024/04/13 for service of process E-mail: 986250419@qq.com referenced FCC Fax: 18906679427 the above for Applicants Name: Jack bu Title: Manager Signature US Agents Name: Wilson Cheung Title: Manager Signature 1/1