X11 X11
-X11
-X11 Wireless standard: 5.2 Transmission distance: 10 meters Output power: 20W Play time: 2~6H Frequency effect: 80Hz ~ 10KHz
Input Power: 5V 1A Maximum current consum ption: 1A Battery type: 18650 Li-ion 3.7V 2400mAh Audio signalinput interface:
1.Wireless connection;
2.Memory function;
3.Support U disk/ TF card/ AUX play mode;
4.Built-in lithium battery;
5.Support MP3/WAVmusic format decoding;
6.Use high-fidelity speakers, make the sound more natural and delicate;
7.1+1 serial function;
8.Water resistance IPX6.
-X11 1 2 3 4 5 6
-X11
-X11
-X11
U S B T Y P E - C T F A U X 7 8 9 10
-X11 1 2 3 4 5 6 U S B T Y P E - C T F A U X 7 8 9 10 1.Short press: volume up; long press: next song. 2.Pause/play. 3.Mode key: Click to switch functions. 4.Light switch/off. 5.Power button: long press to power on; Click: series/Click todisconnect serial connection. 6.Short press: volume down; long press: previous song. 7.USB interface, when inserting a USB drive, defaults to USBplayback mode.
TF card playback mode. 10.Type-C charging cable interface.When inserting a Type-Ccharging cable, it defaults to device charging.
-X11
-X11
-X11 1. Device to connect 1.1 Turn on the dcvice to default wireless mode. 1.2 Turn on wireless device, search model X11 and connect,play music after connection successfully. 2. Suitable for all kinds of mobile phones equipped with wireless.technology, wireless adapter, wireless players. 3. Voice prompt 3.1. there is a voice prompt when turn on/off. 3.2. Low-power voice prompt 3 times, shutdown after 15S. 3.3. there is voice prompt when the button to the maximum volume, no voice prompt at the minimum volume. 4. Mode switching 4.1. enter into wireless by default when starting-up, switching sequence is as follows:
wireless mode -TF card mode -USB mode - AUX mode. 4.2. mode: post-insertion priority. 5. LED Lights Wireless search status: blue light does not flash, wireless pairing status: color light changes. Playback status : Color light blinks 1 time every 1.5 sec. Power on status: Blue light does not flash, red light is always on when charging, red light is off when fully charged. 6.volume the default volume of speaker is 70% when starting-up. 7. Charging to use The machine built overcharge protection circuit,canconnected to a computer orcharger for a long time, about four hours to fully charge. Every battery playback time will be different due to the use of different size of the volume. 8. No working status, automatic shutdown after 15 minutes. 1. Auto power off: the battery protection is automatically activated when the battery is low, please use it after charging for 4 hours. 2.Can not play music: the music file storage.path cannot. be recognized, save file and store in the root directory of the removable device. 3.Connect the computer no sound: computer interface. connection error, please select the correct audio output port. 4. No function or function keys wrong; try again after shutcown. FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference received, including interference that may cause undesired operation. interference, and (2) this device must accept any This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.