DGPLUS Wireless Charger User Manual Applicable equipments Apple:
iPhone 12 /12 Pro /12 Pro Max /12 Mini iPhone 13 /13 Pro /13 Pro Max /13 Mini iPhone 14 /14 Plus / 14 Pro /14 Pro Max iPhone 15 /15 Plus / 15 Pro /15 Pro Max iPhone 16 Series and Later Others:
Qi-compatible Phone with Magnetic Case Instructions Connect to Wall Adapter Power Adapter USB-C Cable Product Parameters Input: 5V---2A/9V---2A/12V---1.5A Output: 5W/7.5W/10W/15W(self adjustable) Frequency:
113kHz-205kHz Dimension: 118*70*78mm Net Weight: 125g Coil LED Indicator 1 2 Type Cinput
Connect the adapter and the charger with the provided USB cable.
Plug the Wall Adapter into the socket. Reminder: You'll need a USB-C charger Working Condition Power on Standby Charging Charging Completed FOD & Error LED indicator Color&Status Green light is on for 0.5 seconds ,blue light is on for 0.5 ,and the blue and green light is on for 0.5 seconds Green light on,and turn off after 30 seconds Blue light breathing,and turn off after 30 seconds Blue light off Blue and green light flashing 3 Tips 1.Do not disassemble or throw into fire or water to avoid causinga short circuit. 2. Do not use wireless charger in extremely hot, humid or corrosiveenvironment. 3.Do not use near magnetic bank card or lC card to avoidmalfunctioning. 4. Keep out of reach of children and pets. 5. The images in this manual are sketch drawing of actual product only,actual product might beslightly different.
*Adapter is not included in this package, please purchase in separately 4 FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipmentgenerates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.
--Consult the dealer or an experienced radio/TVtechnician for help. The FCC certification of this device refers to RF exposure testing perfomed in typical operating conditions,where a person is no closer than 20 centimeters from the device surface at all times, 5 except for non-repetitivepatterns with transient time intervals in the order of a second.Only in the stated conditions,the device is shownto fully comply with the FCC RF Exposure requirements of KDB 447498. WIC arning Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The equipment meets the ISED radiation exposure limits set for an uncontrolled environment. During the operation of the device, a distance of 10cm should be kept around the device and above the top surface of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes :
( 1 ) Ce d ispositif ne peut causer d'interf rences ; et
( 2 )Ce d ispositif doit accepter toute interfrence ,y compris les interf rences qui peuvent causer un mauvais fonctionnement de l'appareil. Lquipement respecte les limites dexposition aux rayonnements ionisants fixes pour un environnement non contr?l . Pendant le fonctionnement du d ispositif, une distance de 10cm devrait tre maintenue autour du d ispositif et au-dessus de la surface sup rieure du d ispositif.