FCC ID: E2KAX211D2 Wi-Fi 6E AX211 Module

by: Dell Inc. latest update: 2023-05-23 model: AX211D2

Sixty Nine grants have been issued under this FCC ID from 06/16/2021 to 05/23/2023 (this is one of ninety-three releases in 2023 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked instructions, warrantee terms, password defaults, troubleshooting guides, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various FCC-Statement-WLAN-v15A Users Manual pdf 155.32 KiB April 10 2023 / October 09 2023 delayed release
various Intel WiFi Adapter Information Guide 0825 Draft 0928 Users Manual pdf 2.70 MiB January 15 2023 / January 19 2023
various Users Manual pdf May 04 2022 / November 01 2022 delayed release
various User Manual Users Manual pdf 1.96 MiB April 19 2023
various User Manual-2 Users Manual pdf 1.54 MiB May 31 2022 / November 27 2022 delayed release
various User guide Users Manual pdf 1.96 MiB April 10 2023 / October 09 2023 delayed release
various Users Manual 1 Users Manual pdf 1.96 MiB June 29 2022 / July 20 2022 delayed release
various Users Manual 2 Users Manual pdf 88.70 KiB June 29 2022 / July 20 2022 delayed release
various Internal Photo Internal Photos pdf 1.76 MiB June 29 2022 / July 20 2022 delayed release
various Internal Photos Internal Photos pdf 4.08 MiB April 19 2023
various Internal Photos Antennas Internal Photos pdf 87.68 KiB January 15 2023 / January 19 2023
various Internal Photos Antennas Internal Photos pdf 836.78 KiB May 23 2023
various External Photo External Photos pdf 1.91 MiB June 29 2022 / July 20 2022 delayed release
various External Photos External Photos pdf 1.98 MiB June 29 2022 / July 20 2022 delayed release
various ID Label/Location Info pdf June 29 2022 / July 18 2022
various ID Label/Location Info pdf June 29 2022 / July 18 2022
various ID Label/Location Info pdf April 10 2023 / April 11 2023
various Label Information 0410 ID Label/Location Info pdf 202.67 KiB April 10 2023 / April 11 2023
various Label and Location ID Label/Location Info pdf 68.37 KiB April 19 2023
various 230210-07.TR01 FCC WLAN UNII-4 SAR Dell P153G RF Exposure Info pdf 1.08 MiB May 23 2023
various 230210-07.TR01 FCC WLAN UNII-4 SAR Dell P153G AnnexE RF Exposure Info pdf 2.65 MiB May 23 2023
various 230210-07.TR01 FCC WLAN UNII-4 SAR Dell P153G AnnexF Test Setup Photos pdf 457.84 KiB May 23 2023
various Attestation Letter Per KDB 986446 Dell ID Rev02 Attestation Statements pdf 709.61 KiB May 23 2023
various C2PC letter Rev01 Cover Letter(s) pdf 369.77 KiB May 23 2023
various Power of Attorney Letter Cover Letter(s) pdf 175.88 KiB May 23 2023
various FCC-Modular-Letter-AX211D2W Rev01 Cover Letter(s) pdf 292.96 KiB May 23 2023
various Attestation Statements pdf April 19 2023
various Attestation Letter Covered List Attestation Statements pdf 442.80 KiB April 19 2023
various FCC Modular Letter Cover Letter(s) pdf 1.44 MiB April 19 2023
various Permissive Change Letter Cover Letter(s) pdf 360.07 KiB April 19 2023
various RF Exposure SAR Calibration TR02 RF Exposure Info pdf 2.65 MiB April 19 2023
various RF Exposure SAR Report Calibration TR01 RF Exposure Info pdf 2.65 MiB April 19 2023
various RF Exposure SAR Report TR01 RF Exposure Info pdf 1018.56 KiB April 19 2023
various RF Exposure SAR Report TR02 RF Exposure Info pdf 1.01 MiB April 19 2023
various Test Report Antenna Hong Bo Black Test Report pdf 1.79 MiB April 19 2023
various Test Report Antenna Hong Bo Gray Test Report pdf 1.79 MiB April 19 2023
various Test Report Antenna WNC Black Test Report pdf 2.03 MiB April 19 2023
various Test Report Antenna WNC Gray Test Report pdf 1.49 MiB April 19 2023
various Test Setup Photos SAR TR01 Test Setup Photos pdf 472.00 KiB April 19 2023
various Test Setup Photos SAR TR02 Test Setup Photos pdf 413.51 KiB April 19 2023
various 210504 DPCSA Op Report FCC Rev04 Operational Description pdf April 10 2023 confidential
various 221114-01.TR01 FCC WLAN TAS Compliance Dell P154G AX211D2W Rev01 RF Exposure Info pdf 511.60 KiB April 10 2023 / April 11 2023
various Attestation Letter Per KDB 986446 Attestation Statements pdf 142.92 KiB April 10 2023 / April 11 2023
various C2PC letter AX211D2W Cover Letter(s) pdf 1.38 MiB April 10 2023 / April 11 2023
various FCC Confidentiality Rev01 Cover Letter(s) pdf 280.70 KiB April 10 2023 / April 11 2023
various Intel DPCSA Declaration - RevC Operational Description pdf April 10 2023 confidential
various antenna report Auden 20230330 Test Report pdf 2.01 MiB April 10 2023 / April 11 2023
various antenna report Auden 20230330 Photos Test Setup Photos pdf 1.14 MiB April 10 2023 / October 09 2023 delayed release
various antenna report WNC 20221117 Photos Test Setup Photos pdf 2.15 MiB April 10 2023 / October 09 2023 delayed release
various antenna report WNC 20230331 Test Report pdf 2.60 MiB April 10 2023 / April 11 2023
various Cover Letter(s) pdf April 10 2023 / April 11 2023
various 220928-01.TR02 FCC UNII-4 SAR AX211D2W RF Exposure Info pdf 1.00 MiB January 15 2023 / January 19 2023
various 220928-01.TR02 FCC UNII-4 SAR AX211D2W Annex E RF Exposure Info pdf 1.63 MiB January 15 2023 / January 19 2023
various 220928-01.TR04-FCC WLAN UNII4 AX211D2W - Photographs Test Setup Photos pdf 1.01 MiB January 15 2023 / January 19 2023
various 220928-01.TR04-FCC WLAN UNII4 AX211D2W Part1 Test Report pdf 4.11 MiB January 15 2023 / January 19 2023
various 220928-01.TR04-FCC WLAN UNII4 AX211D2W Part2 Test Report pdf 4.35 MiB January 15 2023 / January 19 2023
various 5.9GHz Addendum to SkyCross Intel Antenna Data Sheet Test Report pdf 362.18 KiB January 15 2023 / January 19 2023
various C2PC letter Cover Letter(s) pdf 464.94 KiB January 15 2023 / January 19 2023
various Power of Attorney Letter Cover Letter(s) pdf 265.20 KiB January 15 2023 / January 19 2023
various Passive-Scan-Attestation UNII4 Dec.22 Attestation Statements pdf 440.03 KiB January 15 2023 / January 19 2023
various FCC NII Software Security Dec.22 Attestation Statements pdf 744.56 KiB January 15 2023 / January 19 2023
various FCC Authorization for Dell Employees Cover Letter(s) pdf 79.41 KiB January 15 2023 / January 19 2023
various Intel WiFi Adapter Information Guide 0825 Draft 0928 Test Setup Photos pdf 535.61 KiB January 15 2023 / January 19 2023
various Intel Ref Antenna data HMC-M2 Ant Spec Universe SkyCross Antenna Test Report pdf 718.04 KiB January 15 2023 / January 19 2023
various Cover Letter(s) pdf June 29 2022 / July 18 2022
various Cover Letter(s) pdf June 29 2022 / July 18 2022
various Operational Description antenna1 Operational Description pdf June 29 2022 confidential
various Operational Description antenna2 Operational Description pdf June 29 2022 confidential
various Cover Letter(s) pdf June 29 2022 / July 18 2022
various Cover Letter(s) pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various Test SetUp Photo SAR Test Setup Photos pdf 23.00 KiB June 29 2022 / July 20 2022 delayed release
various Tune Up Procedure Parts List/Tune Up Info pdf June 29 2022 confidential
various Cover Letter(s) pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various Test Setup Photos SAR Test Setup Photos pdf 95.33 KiB June 29 2022 / July 20 2022 delayed release
various Cover Letter(s) pdf May 31 2022
various Cover Letter(s) pdf May 31 2022
various Operational Description-1 Operational Description pdf May 31 2022 confidential
various Operational Description-2 Operational Description pdf May 31 2022 confidential
various Operational Description antenna-1 Operational Description pdf May 31 2022 confidential
various Operational Description antenna-2 Operational Description pdf May 31 2022 confidential
various RF Exposure Info pdf May 04 2022 / May 05 2022
various Cover Letter(s) pdf May 04 2022 / May 05 2022
various FCC-Statement-WLAN-v15A Users Manual pdf 155.32 KiB April 10 2023 / October 09 2023 delayed release
various Intel WiFi Adapter Information Guide 0825 Draft 0928 Users Manual pdf 2.70 MiB January 15 2023 / January 19 2023
various Users Manual pdf May 04 2022 / November 01 2022 delayed release
various User Manual Users Manual pdf 1.96 MiB April 19 2023
various User Manual-2 Users Manual pdf 1.54 MiB May 31 2022 / November 27 2022 delayed release
various User guide Users Manual pdf 1.96 MiB April 10 2023 / October 09 2023 delayed release
various Users Manual 1 Users Manual pdf 1.96 MiB June 29 2022 / July 20 2022 delayed release
various Users Manual 2 Users Manual pdf 88.70 KiB June 29 2022 / July 20 2022 delayed release
various Internal Photo Internal Photos pdf 1.76 MiB June 29 2022 / July 20 2022 delayed release
various Internal Photos Internal Photos pdf 4.08 MiB April 19 2023
various Internal Photos Antennas Internal Photos pdf 87.68 KiB January 15 2023 / January 19 2023
various Internal Photos Antennas Internal Photos pdf 836.78 KiB May 23 2023
various External Photo External Photos pdf 1.91 MiB June 29 2022 / July 20 2022 delayed release
various External Photos External Photos pdf 1.98 MiB June 29 2022 / July 20 2022 delayed release
various ID Label/Location Info pdf June 29 2022 / July 18 2022
various ID Label/Location Info pdf June 29 2022 / July 18 2022
various Label Information 0410 ID Label/Location Info pdf 202.67 KiB April 10 2023 / April 11 2023
various Label and Location ID Label/Location Info pdf 68.37 KiB April 19 2023
various 230210-07.TR01 FCC WLAN UNII-4 SAR Dell P153G RF Exposure Info pdf 1.08 MiB May 23 2023
various 230210-07.TR01 FCC WLAN UNII-4 SAR Dell P153G AnnexE RF Exposure Info pdf 2.65 MiB May 23 2023
various 230210-07.TR01 FCC WLAN UNII-4 SAR Dell P153G AnnexF Test Setup Photos pdf 457.84 KiB May 23 2023
various Attestation Letter Per KDB 986446 Dell ID Rev02 Attestation Statements pdf 709.61 KiB May 23 2023
various C2PC letter Rev01 Cover Letter(s) pdf 369.77 KiB May 23 2023
various Power of Attorney Letter Cover Letter(s) pdf 175.88 KiB May 23 2023
various FCC-Modular-Letter-AX211D2W Rev01 Cover Letter(s) pdf 292.96 KiB May 23 2023
various Attestation Statements pdf April 19 2023
various Attestation Letter Covered List Attestation Statements pdf 442.80 KiB April 19 2023
various FCC Modular Letter Cover Letter(s) pdf 1.44 MiB April 19 2023
various Permissive Change Letter Cover Letter(s) pdf 360.07 KiB April 19 2023
various RF Exposure SAR Calibration TR02 RF Exposure Info pdf 2.65 MiB April 19 2023
various RF Exposure SAR Report Calibration TR01 RF Exposure Info pdf 2.65 MiB April 19 2023
various RF Exposure SAR Report TR01 RF Exposure Info pdf 1018.56 KiB April 19 2023
various RF Exposure SAR Report TR02 RF Exposure Info pdf 1.01 MiB April 19 2023
various Test Report Antenna Hong Bo Black Test Report pdf 1.79 MiB April 19 2023
various Test Report Antenna Hong Bo Gray Test Report pdf 1.79 MiB April 19 2023
various Test Report Antenna WNC Black Test Report pdf 2.03 MiB April 19 2023
various Test Report Antenna WNC Gray Test Report pdf 1.49 MiB April 19 2023
various Test Setup Photos SAR TR01 Test Setup Photos pdf 472.00 KiB April 19 2023
various Test Setup Photos SAR TR02 Test Setup Photos pdf 413.51 KiB April 19 2023
various 221114-01.TR01 FCC WLAN TAS Compliance Dell P154G AX211D2W Rev01 RF Exposure Info pdf 511.60 KiB April 10 2023 / April 11 2023
various Attestation Letter Per KDB 986446 Attestation Statements pdf 142.92 KiB April 10 2023 / April 11 2023
various C2PC letter AX211D2W Cover Letter(s) pdf 1.38 MiB April 10 2023 / April 11 2023
various FCC Confidentiality Rev01 Cover Letter(s) pdf 280.70 KiB April 10 2023 / April 11 2023
various antenna report Auden 20230330 Test Report pdf 2.01 MiB April 10 2023 / April 11 2023
various antenna report Auden 20230330 Photos Test Setup Photos pdf 1.14 MiB April 10 2023 / October 09 2023 delayed release
various antenna report WNC 20221117 Photos Test Setup Photos pdf 2.15 MiB April 10 2023 / October 09 2023 delayed release
various antenna report WNC 20230331 Test Report pdf 2.60 MiB April 10 2023 / April 11 2023
various Cover Letter(s) pdf April 10 2023 / April 11 2023
various 220928-01.TR02 FCC UNII-4 SAR AX211D2W RF Exposure Info pdf 1.00 MiB January 15 2023 / January 19 2023
various 220928-01.TR02 FCC UNII-4 SAR AX211D2W Annex E RF Exposure Info pdf 1.63 MiB January 15 2023 / January 19 2023
various 220928-01.TR04-FCC WLAN UNII4 AX211D2W - Photographs Test Setup Photos pdf 1.01 MiB January 15 2023 / January 19 2023
various 220928-01.TR04-FCC WLAN UNII4 AX211D2W Part1 Test Report pdf 4.11 MiB January 15 2023 / January 19 2023
various 220928-01.TR04-FCC WLAN UNII4 AX211D2W Part2 Test Report pdf 4.35 MiB January 15 2023 / January 19 2023
various 5.9GHz Addendum to SkyCross Intel Antenna Data Sheet Test Report pdf 362.18 KiB January 15 2023 / January 19 2023
various C2PC letter Cover Letter(s) pdf 464.94 KiB January 15 2023 / January 19 2023
various Power of Attorney Letter Cover Letter(s) pdf 265.20 KiB January 15 2023 / January 19 2023
various Passive-Scan-Attestation UNII4 Dec.22 Attestation Statements pdf 440.03 KiB January 15 2023 / January 19 2023
various FCC NII Software Security Dec.22 Attestation Statements pdf 744.56 KiB January 15 2023 / January 19 2023
various FCC Authorization for Dell Employees Cover Letter(s) pdf 79.41 KiB January 15 2023 / January 19 2023
various Intel WiFi Adapter Information Guide 0825 Draft 0928 Test Setup Photos pdf 535.61 KiB January 15 2023 / January 19 2023
various Intel Ref Antenna data HMC-M2 Ant Spec Universe SkyCross Antenna Test Report pdf 718.04 KiB January 15 2023 / January 19 2023
various Cover Letter(s) pdf June 29 2022 / July 18 2022
various Cover Letter(s) pdf June 29 2022 / July 18 2022
various Cover Letter(s) pdf June 29 2022 / July 18 2022
various Cover Letter(s) pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various RF Exposure Info pdf June 30 2022 / July 18 2022
various Test SetUp Photo SAR Test Setup Photos pdf 23.00 KiB June 29 2022 / July 20 2022 delayed release
various Cover Letter(s) pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various RF Exposure Info pdf June 29 2022 / July 18 2022
various Test Setup Photos SAR Test Setup Photos pdf 95.33 KiB June 29 2022 / July 20 2022 delayed release
various Cover Letter(s) pdf May 31 2022
various Cover Letter(s) pdf May 31 2022
various RF Exposure Info pdf May 04 2022 / May 05 2022
various Cover Letter(s) pdf May 04 2022 / May 05 2022

frequency equipment class purpose
1 2023-05-23 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2023-04-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 2422 ~ 2462 DTS - Digital Transmission System
4 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
5 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
6 2023-04-11 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
7 2422 ~ 2462 DTS - Digital Transmission System
8 2023-01-19 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
9 2022-07-18 2422 ~ 2462 DTS - Digital Transmission System
10 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
11 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
15 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
16 2422 ~ 2462 DTS - Digital Transmission System
17 2022-05-31 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
19 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
20 2422 ~ 2462 DTS - Digital Transmission System
21 2022-05-05 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
22 2022-05-04 2422 ~ 2462 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
23 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 2022-04-01 2422 ~ 2462 DTS - Digital Transmission System
26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
27 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
28 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
29 2022-03-28 2422 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
30 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
31 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
32 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
33 2022-03-24 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
34 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
35 2422 ~ 2462 DTS - Digital Transmission System
36 2422 ~ 2462 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
37 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
38 2422 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
39 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
40 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
41 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
42 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
43 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II Permissive Change
44 2422 ~ 2462 DTS - Digital Transmission System
45 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
46 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
47 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
48 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II Permissive Change
49 2422 ~ 2462 DTS - Digital Transmission System
50 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
51 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
52 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
53 2422 ~ 2462 DTS - Digital Transmission System
54 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
55 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
56 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
57 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
58 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Class II permissive change or modification of presently authorized equipment
59 2422 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
60 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
61 2021-09-24 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
62 2021-08-27 2422 ~ 2462 DTS - Digital Transmission System
63 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
64 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
65 2021-06-16 JBP - Part 15 Class B Computing Device Peripheral Change in Identification
66 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
67 2422 ~ 2462 DTS - Digital Transmission System
68 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
69 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2023-05-23
various 2023-04-19
various 2023-04-11
various 2023-01-19
various 2022-07-18
various 2022-05-31
various 2022-05-05
various 2022-05-04
various 2022-04-01
various 2022-03-28
various 2022-03-24
various 2021-09-24
various 2021-08-27
various 2021-06-16
various Applicant's complete, legal business name Dell Inc.
various FCC Registration Number (FRN) 0008359580
various Physical Address One Dell Way
various Round Rock, TX
various Round Rock, Texas 78682
various United States
app s TCB Information
various TCB Application Email Address K******@sporton-usa.com
various h******@acbcert.com
various v******@nemko.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code E2K
various Equipment Product Code AX211D2
app s Person at the applicant's address to receive grant or for contact
various Name D**** A****** B******
various Title Distinguished Member of Technical Staff
various Telephone Number 512-7********
various Fax Number 512-2********
various E-mail d******@dell.com
app s Technical Contact
various Firm Name Dell Inc
various Sporton International Inc.
various Intel Corporation
various DEKRA Testing and Certification Co., Ltd.
various Name D****** B******
various I******** C****
various S****** H******
various Y**** L********
various Physical Address One Dell Way
various No.52, Huaya 1st Rd., Guishan Dist.
various 100 Center Point Circle Suite 200
various Round Rock, 78682
various Taoyuan, 333
various Columbia, South Carolina 29210
various United States
various Taiwan
various Telephone Number 80028********
various 886-3********
various 800-2********
various 80331********
various Fax Number 886-3********
various E-mail D******@Dell.com
various i******@sporton.com.tw
various s******@intel.com
various y******@dekra.com
app s Non Technical Contact
various Firm Name Dell Inc
various Intel Corporation
various Name D**** B****
various G**** C****
various Physical Address One Dell Way
various 425 rue de Goa
various Round Rock, 78682
various Antibes, 06600
various United States
various France
various Telephone Number 80028********
various +3349********
various E-mail D******@Dell.com
various g******@intel.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)10/09/2023
various06/14/2023
various07/20/2022
various11/27/2022
various11/01/2022
various09/27/2022
various09/28/2022
various09/24/2022
various03/31/2022
various04/02/2022
various03/24/2022
various02/24/2022
various12/14/2021
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
various6XD - 15E 6 GHz Low Power Indoor Client
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Wi-Fi 6E AX211 Module
variousIntel Wi-Fi 6E AX211
variousWLAN and BT, 2x2 Pcle M.2 1216 SD adapter card
variousWLAN and BT, 2x2 PCIe M.2 1216 SD adapter card
variousWi-Fi 6E AX211
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousLimited Single Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousChange in Identification
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This change establishes portable category SAR conditions for the Dell model P153G PC. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.68 W/kg and 1.44 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the Dell model P151G PC with Hong-Bo 330-24004 and 330-24005 and WNC 81ELA115.G08 and 81ELA115.G09 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.81W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the Dell model P151G PC with Hong-Bo 330-24004 and 330-24005 and WNC 81ELA115.G08 and 81ELA115.G09 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousThis is a Class II Permissive Change. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.57W/kg respectively. This change establishes portable category SAR conditions for the Dell model P151G PC with Hong-Bo 330-24004 and 330-24005 and WNC 81ELA115.G08 and 81ELA115.G09 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.67 W/kg and 1.57 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P151G PC with Hong-Bo 330-24004 and 330-24005 and WNC 81ELA115.G08 and 81ELA115.G09 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 0.93W/kg respectively. This change establishes portable category SAR conditions for the Dell model P154G PC with Auden A22453-30 and WNC 81ELA115.G40 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Evaluates for the WLAN TAS implementation.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.55W/kg and 0.93W/kg respectively. This change establishes portable category SAR conditions for the Dell model P154G PC with Auden A22453-30 and WNC 81ELA115.G40 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Evaluates for the WLAN TAS implementation.
variousThis is a Class II Permissive Change. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.21W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.1 W/kg and 0.18 W/kg respectively. This module is approved in portable/mobile configurations with antenna HongBo reference Antenna, at 30 mm minimum test separation distance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet, model: T05J, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.17 W/kg and 1.22 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.27 W/kg and 0.55 W/kg respectively. This module is approved in portable/mobile configurations at 14mm minimum test separation distance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet, model: T05J, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.99 W/kg and 1.12 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.50 W/kg respectively. This module is approved in portable/mobile configurations with antenna HongBo reference Antenna, at 30 mm minimum test separation distance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet, model: T05J, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.12 W/kg and 1.12 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.01 W/kg and 1.50 W/kg respectively. This module is approved in portable/mobile configurations with antenna HongBo reference Antenna, at 30 mm minimum test separation distance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet, model: T05J, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.32 W/kg and 1.49 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.01 W/kg and 1.50 W/kg respectively. This module is approved in portable/mobile configurations with antenna HongBo reference Antenna, at 30 mm minimum test separation distance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet, model: T05J, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.22 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.50 W/kg respectively. This module is approved in portable/mobile configurations with antenna HongBo reference Antenna, at 30 mm minimum test separation distance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet, model: T05J, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.18 W/kg and 1.18 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.27 W/kg and 0.55 W/kg respectively. This module is approved in portable/mobile configurations at 14mm minimum test separation distance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet, model: T05J, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.79 W/kg and 1.18 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.1 W/kg and 0.18 W/kg respectively. This module is approved in portable/mobile configurations with antenna HongBo reference Antenna, at 30 mm minimum test separation distance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Tablet, model: T05J, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.17 W/kg and 1.49 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P35S, P35S001, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.17 W/kg and 1.39 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P35S, P35S001, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.57 W/kg and 1.40 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P35S, P35S001, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.09 W/kg and 1.39 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P35S, P35S001, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.19 W/kg and 1.40 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.50 W/kg respectively. This module is approved in portable/mobile configurations with antenna HongBo reference Antenna, at 30 mm minimum test separation distance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Notebook PC, model: P153G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.68 W/kg and 1.44 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.1 W/kg and 0.18 W/kg respectively. This module is approved in portable/mobile configurations with antenna HongBo reference Antenna, at 30 mm minimum test separation distance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Notebook PC, model: P153G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.51 W/kg and 0.93 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.27 W/kg and 0.55 W/kg respectively. This module is approved in portable/mobile configurations at 14mm minimum test separation distance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Notebook PC, model: P153G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.12 W/kg and 1.30 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.01 W/kg and 1.50 W/kg respectively. This module is approved in portable/mobile configurations with antenna HongBo reference Antenna, at 30 mm minimum test separation distance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Notebook PC, model: P153G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.18 W/kg and 1.44 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.81W/kg and 1.46W/kg respectively. This change establishes portable category SAR conditions for the Dell model P151G PC with Hong-Bo 330-24004 and 330-24005 and WNC 81ELA115.G08 and 81ELA115.G09 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26W/kg and 1.46W/kg respectively. This change establishes portable category SAR conditions for the Dell model P151G PC with Hong-Bo 330-24004 and 330-24005 and WNC 81ELA115.G08 and 81ELA115.G09 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.46W/kg respectively. This change establishes portable category SAR conditions for the Dell model P151G PC with Hong-Bo 330-24004 and 330-24005 and WNC 81ELA115.G08 and 81ELA115.G09 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.67 W/kg and 1.46 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P151G PC with Hong-Bo 330-24004 and 330-24005 and WNC 81ELA115.G08 and 81ELA115.G09 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.55W/kg and 0.93W/kg respectively. This change establishes portable category SAR conditions for the Dell model P154G PC with Auden A22453-30 and WNC 81ELA115.G40 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 0.93W/kg respectively. This change establishes portable category SAR conditions for the Dell model P154G PC with Auden A22453-30 and WNC 81ELA115.G40 antennas. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 0.93W/kg respectively. This change establishes portable category SAR conditions for the Dell model P154G PC with Auden A22453-30 and WNC 81ELA115.G40 antennas. Antenna(s) is/are of the same type and lower gain from the original approval. SAR testing was performed to demonstrate RF compliance
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 0.93 W/kg respectively. This change establishes portable category SAR conditions for the Dell model P154G PC with Auden A22453-30 and WNC 81ELA115.G40 antennas. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P134G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.18 W/kg and 1.38 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P135G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.82 W/kg and 0.97 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P141G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.66 W/kg and 1.06 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P142G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.07 W/kg and 1.16 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P141G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.56 W/kg and 1.26 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P136G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.18 W/kg and 1.57 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P110F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.01 W/kg and 1.18 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P142G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.43 W/kg and 1.34 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P135G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.15 W/kg and 0.97 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P110F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.17 W/kg and 1.20 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P141G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.63 W/kg and 1.19 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P110F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.03 W/kg and 1.20 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P136G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.78 W/kg and 1.17 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P110F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.50 W/kg and 0.67 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P136G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.39 W/kg and 1.58 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P135G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.79 W/kg and 0.94 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P133G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.17 W/kg and 1.36 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P136G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.19 W/kg and 1.58 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P141G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.70 W/kg and 1.26 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P133G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.19 W/kg and 1.38 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P134G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.14 W/kg and 1.31 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P133G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.07 W/kg and 1.26 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P134G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.96 W/kg and 1.02 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P142G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.15 W/kg and 1.34 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P133G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.19 W/kg and 1.38 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P142G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.95 W/kg and 1.13 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P135G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.67 W/kg and 0.82 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the specific host of DELL Portable Computer, model: P134G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.40 W/kg and 1.38 W/kg, respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.27 W/kg and 0.55 W/kg respectively. This module is approved in portable/mobile configurations at 14mm minimum test separation distance.
variousower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.1 W/kg and 0.18 W/kg respectively. This module is approved in portable/mobile configurations with antenna HongBo reference Antenna, at 30 mm minimum test separation distance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.01 W/kg and 1.50 W/kg respectively. This module is approved in portable/mobile configurations with antenna HongBo reference Antenna, at 30 mm minimum test separation distance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive Class II Change Application to cover one more Type Antenna (monopole) with S/N: 260-25083. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.50 W/kg respectively. This module is approved in portable/mobile configurations with antenna HongBo reference Antenna, at 30 mm minimum test separation distance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.63W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.59 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 14mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.24W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Intel Corporation S.A.S.
various SPORTON International Inc.
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various Name N****** A********
various A****** C****
various R**** C********
various Telephone Number 00334********
various +886-******** Extension:
various +886-********
various 00334********
various Fax Number +886-********
various 00334********
various E-mail n******@intel.com
various a******@sporton.com.tw
various r******@bureauveritas.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.163
1 2 15E CC MO 5190 5230 0.249
1 3 15E CC MO 5210 5210 0.082
1 4 15E CC MO 5250 5250 0.067
1 5 15E CC MO ND 5260 5320 0.152
1 6 15E CC MO ND 5270 5310 0.246
1 7 15E CC MO ND 5290 5290 0.081
1 8 15E CC MO ND 5500 5700 0.249
1 9 15E CC MO ND 5710 5710 0.128
1 1 15E CC MO ND 5720 5720 0.114
1 11 15E CC MO ND 5530 5690 0.246
1 12 15E CC MO 5745 5825 0.259
1 13 15E CC MO 5755 5795 0.268
1 14 15E CC MO 5775 5775 0.229
1 15 15E CC EP MO 5845 5885 0.318
1 16 15E CC EP MO 5835 5875 0.706
1 17 15E CC EP MO 5855 5855 0.6
1 18 15E CC EP MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.009
3 2 15C CC MO 2412 2472 0.979
3 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.163
4 2 15E CC MO 5190 5230 0.249
4 3 15E CC MO 5210 5210 0.082
4 4 15E CC MO 5250 5250 0.067
4 5 15E CC MO ND 5260 5320 0.152
4 6 15E CC MO ND 5270 5310 0.246
4 7 15E CC MO ND 5290 5290 0.081
4 8 15E CC MO ND 5500 5700 0.249
4 9 15E CC MO ND 5710 5710 0.128
4 1 15E CC MO ND 5720 5720 0.114
4 11 15E CC MO ND 5530 5690 0.246
4 12 15E CC MO 5745 5825 0.259
4 13 15E CC MO 5755 5795 0.268
4 14 15E CC MO 5775 5775 0.229
4 15 15E CC MO 5845 5885 0.318
4 16 15E CC MO 5835 5875 0.706
4 17 15E CC MO 5855 5855 0.6
4 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC EP MO 5955 7115 0.003
5 2 15E CC EP MO 5965 7085 0.006
5 3 15E CC EP MO 5985 7025 0.011
5 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5180 5240 0.163
6 2 15E CC MO 5190 5230 0.249
6 3 15E CC MO 5210 5210 0.082
6 4 15E CC MO 5250 5250 0.067
6 5 15E CC MO ND 5260 5320 0.152
6 6 15E CC MO ND 5270 5310 0.246
6 7 15E CC MO ND 5290 5290 0.081
6 8 15E CC MO ND 5500 5700 0.249
6 9 15E CC MO ND 5710 5710 0.128
6 1 15E CC MO ND 5720 5720 0.114
6 11 15E CC MO ND 5530 5690 0.246
6 12 15E CC MO 5745 5825 0.259
6 13 15E CC MO 5755 5795 0.268
6 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.009
7 2 15C CC MO 2412 2472 0.979
7 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5180 5240 0.163
8 2 15E CC MO 5190 5230 0.249
8 3 15E CC MO 5210 5210 0.082
8 4 15E CC MO 5250 5250 0.067
8 5 15E CC MO ND 5260 5320 0.152
8 6 15E CC MO ND 5270 5310 0.246
8 7 15E CC MO ND 5290 5290 0.081
8 8 15E CC MO ND 5500 5700 0.249
8 9 15E CC MO ND 5710 5710 0.128
8 1 15E CC MO ND 5720 5720 0.114
8 11 15E CC MO ND 5530 5690 0.246
8 12 15E CC MO 5745 5825 0.259
8 13 15E CC MO 5755 5795 0.268
8 14 15E CC MO 5775 5775 0.229
8 15 15E CC MO 5845 5885 0.318
8 16 15E CC MO 5835 5875 0.706
8 17 15E CC MO 5855 5855 0.6
8 18 15E CC MO 5815 5815 0.306
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.009
9 2 15C CC MO 2412 2472 0.979
9 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC EP MO 5955 7115 0.003
10 2 15E CC EP MO 5965 7085 0.006
10 3 15E CC EP MO 5985 7025 0.011
10 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E CC MO 5180 5240 0.163
11 2 15E CC MO 5190 5230 0.249
11 3 15E CC MO 5210 5210 0.082
11 4 15E CC MO 5250 5250 0.067
11 5 15E CC MO ND 5260 5320 0.152
11 6 15E CC MO ND 5270 5310 0.246
11 7 15E CC MO ND 5290 5290 0.081
11 8 15E CC MO ND 5500 5700 0.249
11 9 15E CC MO ND 5710 5710 0.128
11 1 15E CC MO ND 5720 5720 0.114
11 11 15E CC MO ND 5530 5690 0.246
11 12 15E CC MO 5745 5825 0.259
11 13 15E CC MO 5755 5795 0.268
11 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E CC MO 5180 5240 0.163
14 2 15E CC MO 5190 5230 0.249
14 3 15E CC MO 5210 5210 0.082
14 4 15E CC MO 5250 5250 0.067
14 5 15E CC MO ND 5260 5320 0.152
14 6 15E CC MO ND 5270 5310 0.246
14 7 15E CC MO ND 5290 5290 0.081
14 8 15E CC MO ND 5500 5700 0.249
14 9 15E CC MO ND 5710 5710 0.128
14 1 15E CC MO ND 5720 5720 0.114
14 11 15E CC MO ND 5530 5690 0.246
14 12 15E CC MO 5745 5825 0.259
14 13 15E CC MO 5755 5795 0.268
14 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15E CC EP MO 5955 7115 0.003
15 2 15E CC EP MO 5965 7085 0.006
15 3 15E CC EP MO 5985 7025 0.011
15 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402 2480 0.009
16 2 15C CC MO 2412 2472 0.979
16 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15E CC EP MO 5955 7115 0.003
17 2 15E CC EP MO 5965 7085 0.006
17 3 15E CC EP MO 5985 7025 0.011
17 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E CC MO 5180 5240 0.163
19 2 15E CC MO 5190 5230 0.249
19 3 15E CC MO 5210 5210 0.082
19 4 15E CC MO 5250 5250 0.067
19 5 15E CC MO ND 5260 5320 0.152
19 6 15E CC MO ND 5270 5310 0.246
19 7 15E CC MO ND 5290 5290 0.081
19 8 15E CC MO ND 5500 5700 0.249
19 9 15E CC MO ND 5710 5710 0.128
19 1 15E CC MO ND 5720 5720 0.114
19 11 15E CC MO ND 5530 5690 0.246
19 12 15E CC MO 5745 5825 0.259
19 13 15E CC MO 5755 5795 0.268
19 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402 2480 0.009
20 2 15C CC MO 2412 2472 0.979
20 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15E CC MO 5180 5240 0.163
21 2 15E CC MO 5190 5230 0.249
21 3 15E CC MO 5210 5210 0.082
21 4 15E CC MO 5250 5250 0.067
21 5 15E CC MO ND 5260 5320 0.152
21 6 15E CC MO ND 5270 5310 0.246
21 7 15E CC MO ND 5290 5290 0.081
21 8 15E CC MO ND 5500 5700 0.249
21 9 15E CC MO ND 5710 5710 0.128
21 1 15E CC MO ND 5720 5720 0.114
21 11 15E CC MO ND 5530 5690 0.246
21 12 15E CC MO 5745 5825 0.259
21 13 15E CC MO 5755 5795 0.268
21 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402 2480 0.009
22 2 15C CC MO 2412 2472 0.979
22 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC EP MO 5955 7115 0.003
23 2 15E CC EP MO 5965 7085 0.006
23 3 15E CC EP MO 5985 7025 0.011
23 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402 2480 0.009
25 2 15C CC MO 2412 2472 0.979
25 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15E CC MO 5180 5240 0.163
27 2 15E CC MO 5190 5230 0.249
27 3 15E CC MO 5210 5210 0.082
27 4 15E CC MO 5250 5250 0.067
27 5 15E CC MO ND 5260 5320 0.152
27 6 15E CC MO ND 5270 5310 0.246
27 7 15E CC MO ND 5290 5290 0.081
27 8 15E CC MO ND 5500 5700 0.249
27 9 15E CC MO ND 5710 5710 0.128
27 1 15E CC MO ND 5720 5720 0.114
27 11 15E CC MO ND 5530 5690 0.246
27 12 15E CC MO 5745 5825 0.259
27 13 15E CC MO 5755 5795 0.268
27 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E CC MO 5955 7115 0.003
28 2 15E CC MO 5965 7085 0.006
28 3 15E CC MO 5985 7025 0.011
28 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402 2480 0.009
29 2 15C CC MO 2412 2472 0.979
29 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15E CC MO 5180 5240 0.163
30 2 15E CC MO 5190 5230 0.249
30 3 15E CC MO 5210 5210 0.082
30 4 15E CC MO 5250 5250 0.067
30 5 15E CC MO ND 5260 5320 0.152
30 6 15E CC MO ND 5270 5310 0.246
30 7 15E CC MO ND 5290 5290 0.081
30 8 15E CC MO ND 5500 5700 0.249
30 9 15E CC MO ND 5710 5710 0.128
30 1 15E CC MO ND 5720 5720 0.114
30 11 15E CC MO ND 5530 5690 0.246
30 12 15E CC MO 5745 5825 0.259
30 13 15E CC MO 5755 5795 0.268
30 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15E CC MO 5955 7115 0.003
32 2 15E CC MO 5965 7085 0.007
32 3 15E CC MO 5985 7025 0.011
32 4 15E CC MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15E CC MO 5180 5240 0.163
33 2 15E CC MO 5190 5230 0.249
33 3 15E CC MO 5210 5210 0.082
33 4 15E CC MO 5250 5250 0.067
33 5 15E CC MO ND 5260 5320 0.152
33 6 15E CC MO ND 5270 5310 0.246
33 7 15E CC MO ND 5290 5290 0.081
33 8 15E CC MO ND 5500 5700 0.249
33 9 15E CC MO ND 5710 5710 0.128
33 1 15E CC MO ND 5720 5720 0.114
33 11 15E CC MO ND 5530 5690 0.246
33 12 15E CC MO 5745 5825 0.259
33 13 15E CC MO 5755 5795 0.268
33 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15E CC MO 5180 5240 0.163
34 2 15E CC MO 5190 5230 0.249
34 3 15E CC MO 5210 5210 0.082
34 4 15E CC MO 5250 5250 0.067
34 5 15E CC MO ND 5260 5320 0.152
34 6 15E CC MO ND 5270 5310 0.246
34 7 15E CC MO ND 5290 5290 0.081
34 8 15E CC MO ND 5500 5700 0.249
34 9 15E CC MO ND 5710 5710 0.128
34 1 15E CC MO ND 5720 5720 0.114
34 11 15E CC MO ND 5530 5690 0.246
34 12 15E CC MO 5745 5825 0.259
34 13 15E CC MO 5755 5795 0.268
34 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402 2480 0.009
35 2 15C CC MO 2412 2472 0.979
35 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15C CC 2402 2480 0.009
36 2 15C CC MO 2412 2472 0.979
36 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402 2480 0.009
38 2 15C CC MO 2412 2472 0.979
38 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15E CC MO 5180 5240 0.163
39 2 15E CC MO 5190 5230 0.249
39 3 15E CC MO 5210 5210 0.082
39 4 15E CC MO 5250 5250 0.067
39 5 15E CC MO ND 5260 5320 0.152
39 6 15E CC MO ND 5270 5310 0.246
39 7 15E CC MO ND 5290 5290 0.081
39 8 15E CC MO ND 5500 5700 0.249
39 9 15E CC MO ND 5710 5710 0.128
39 1 15E CC MO ND 5720 5720 0.114
39 11 15E CC MO ND 5530 5690 0.246
39 12 15E CC MO 5745 5825 0.259
39 13 15E CC MO 5755 5795 0.268
39 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15E CC EP MO 5955 7115 0.003
43 2 15E CC EP MO 5965 7085 0.006
43 3 15E CC EP MO 5985 7025 0.011
43 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15C CC 2402 2480 0.009
44 2 15C CC MO 2412 2472 0.979
44 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15E CC EP MO 5955 7115 0.003
45 2 15E CC EP MO 5965 7085 0.006
45 3 15E CC EP MO 5985 7025 0.011
45 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15E CC EP MO 5955 7115 0.003
46 2 15E CC EP MO 5965 7085 0.006
46 3 15E CC EP MO 5985 7025 0.011
46 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15E CC EP MO 5955 7115 0.003
48 2 15E CC EP MO 5965 7085 0.006
48 3 15E CC EP MO 5985 7025 0.011
48 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15C CC 2402 2480 0.009
49 2 15C CC MO 2412 2472 0.979
49 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15E CC MO 5180 5240 0.163
50 2 15E CC MO 5190 5230 0.249
50 3 15E CC MO 5210 5210 0.082
50 4 15E CC MO 5250 5250 0.067
50 5 15E CC MO ND 5260 5320 0.152
50 6 15E CC MO ND 5270 5310 0.246
50 7 15E CC MO ND 5290 5290 0.081
50 8 15E CC MO ND 5500 5700 0.249
50 9 15E CC MO ND 5710 5710 0.128
50 1 15E CC MO ND 5720 5720 0.114
50 11 15E CC MO ND 5530 5690 0.246
50 12 15E CC MO 5745 5825 0.259
50 13 15E CC MO 5755 5795 0.268
50 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15E CC MO 5180 5240 0.163
51 2 15E CC MO 5190 5230 0.249
51 3 15E CC MO 5210 5210 0.082
51 4 15E CC MO 5250 5250 0.067
51 5 15E CC MO ND 5260 5320 0.152
51 6 15E CC MO ND 5270 5310 0.246
51 7 15E CC MO ND 5290 5290 0.081
51 8 15E CC MO ND 5500 5700 0.249
51 9 15E CC MO ND 5710 5710 0.128
51 1 15E CC MO ND 5720 5720 0.114
51 11 15E CC MO ND 5530 5690 0.246
51 12 15E CC MO 5745 5825 0.259
51 13 15E CC MO 5755 5795 0.268
51 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15E CC MO 5180 5240 0.163
52 2 15E CC MO 5190 5230 0.249
52 3 15E CC MO 5210 5210 0.082
52 4 15E CC MO 5250 5250 0.067
52 5 15E CC MO ND 5260 5320 0.152
52 6 15E CC MO ND 5270 5310 0.246
52 7 15E CC MO ND 5290 5290 0.081
52 8 15E CC MO ND 5500 5700 0.249
52 9 15E CC MO ND 5710 5710 0.128
52 1 15E CC MO ND 5720 5720 0.114
52 11 15E CC MO ND 5530 5690 0.246
52 12 15E CC MO 5745 5825 0.259
52 13 15E CC MO 5755 5795 0.268
52 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15C CC 2402 2480 0.009
53 2 15C CC MO 2412 2472 0.979
53 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15E CC EP MO 5955 7115 0.003
54 2 15E CC EP MO 5965 7085 0.006
54 3 15E CC EP MO 5985 7025 0.011
54 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15E CC EP MO 5955 7115 0.003
55 2 15E CC EP MO 5965 7085 0.006
55 3 15E CC EP MO 5985 7025 0.011
55 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15E CC MO 5180 5240 0.163
56 2 15E CC MO 5190 5230 0.249
56 3 15E CC MO 5210 5210 0.082
56 4 15E CC MO 5250 5250 0.067
56 5 15E CC MO ND 5260 5320 0.152
56 6 15E CC MO ND 5270 5310 0.246
56 7 15E CC MO ND 5290 5290 0.081
56 8 15E CC MO ND 5500 5700 0.249
56 9 15E CC MO ND 5710 5710 0.128
56 1 15E CC MO ND 5720 5720 0.114
56 11 15E CC MO ND 5530 5690 0.246
56 12 15E CC MO 5745 5825 0.259
56 13 15E CC MO 5755 5795 0.268
56 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15E CC EP MO 5955 7115 0.003
58 2 15E CC EP MO 5965 7085 0.006
58 3 15E CC EP MO 5985 7025 0.011
58 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15C CC 2402 2480 0.009
59 2 15C CC MO 2412 2472 0.979
59 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15E CC EP MO 5955 7115 0.003
61 2 15E CC EP MO 5965 7085 0.006
61 3 15E CC EP MO 5985 7025 0.011
61 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15C CC 2402 2480 0.009
62 2 15C CC MO 2412 2472 0.979
62 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15C CC 2402.00000000 2480.00000000 0.0110000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
64 1 15E CC MO 5180 5240 0.163
64 2 15E CC MO 5190 5230 0.249
64 3 15E CC MO 5210 5210 0.082
64 4 15E CC MO ND 5250 5250 0.067
64 5 15E CC MO ND 5260 5320 0.152
64 6 15E CC MO ND 5270 5310 0.246
64 7 15E CC MO ND 5290 5290 0.081
64 8 15E CC MO ND 5500 5700 0.249
64 9 15E CC MO ND 5710 5710 0.128
64 1 15E CC MO ND 5720 5720 0.114
64 11 15E CC MO ND 5530 5690 0.246
64 12 15E CC MO 5745 5825 0.259
64 13 15E CC MO 5755 5795 0.268
64 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
65 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
66 1 15E CC MO 5180 5240 0.163
66 2 15E CC MO 5190 5230 0.249
66 3 15E CC MO 5210 5210 0.082
66 4 15E CC MO 5250 5250 0.067
66 5 15E CC MO ND 5260 5320 0.152
66 6 15E CC MO ND 5270 5310 0.246
66 7 15E CC MO ND 5290 5290 0.081
66 8 15E CC MO ND 5500 5700 0.249
66 9 15E CC MO ND 5710 5710 0.128
66 1 15E CC MO ND 5720 5720 0.114
66 11 15E CC MO ND 5530 5690 0.246
66 12 15E CC MO 5745 5825 0.259
66 13 15E CC MO 5755 5795 0.268
66 14 15E CC MO 5775 5775 0.229
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
67 1 15C CC 2402 2480 0.009
67 2 15C CC MO 2412 2472 0.979
67 3 15C CC MO 2422 2462 0.802
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
68 1 15E CC EP MO 5955 7115 0.003
68 2 15E CC EP MO 5965 7085 0.006
68 3 15E CC EP MO 5985 7025 0.011
68 4 15E CC EP MO 6025 6985 0.021
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
69 1 15C CC 2402.00000000 2480.00000000 0.0110000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC