|
app
s
|
Applicant Information
|
|
|
various
|
Effective |
2023-05-25
|
|
various
|
2023-05-22
|
|
various
|
2023-03-14
|
|
various
|
2023-03-11
|
|
various
|
2022-06-06
|
|
various
|
Applicant's complete, legal business name |
Dell Inc.
|
|
various
|
FCC Registration Number (FRN) |
0008359580
|
|
various
|
Physical Address |
One Dell Way
|
|
various
|
Round Rock, Texas 78682
|
|
various
|
Round Rock, TX
|
|
various
|
United States
|
|
|
app
s
|
TCB Information
|
|
various
|
TCB Application Email Address |
v******@nemko.com
|
|
various
|
K******@sporton-usa.com
|
|
various
|
TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
|
various
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
|
app
s
|
FCC ID
|
|
various
|
Grantee Code |
E2K
|
|
various
|
Equipment Product Code |
L860GL16
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
various
|
Name |
D****** A****** B****
|
|
various
|
Title |
Distinguished Member of Technical Staff
|
|
various
|
Telephone Number |
512-7********
|
|
various
|
Fax Number |
512-2********
|
|
various
|
E-mail |
d******@dell.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| various | Yes |
| various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| various | Yes |
| various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/18/2023 |
| various | 09/08/2023 |
| various | 12/03/2022 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| various |
Is this application for software defined/cognitive radio authorization? | No |
| various | Equipment Class | CBE - Citizens Band End User Devices |
| various | PCB - PCS Licensed Transmitter |
| various | CXX - Communications Rcvr for use w/ licensed Tx and CBs |
| various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE Module |
| various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| various | Modular Equipment Type | Limited Single Modular Approval |
| various | Single Modular Approval |
| various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| various | Class II Permissive Change |
| various | Change in Identification |
| various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| various | Grant Comments | Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports LTE (QPSK, 16QAM, 64QAM) Band 48 This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P175G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.49W/kg and 1.14W/kg, respectively.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure along with the added UNII-4 band of WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P175G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.49W/kg and 1.14W/kg, respectively. |
| various | Class II permissive change for adding new vendor of PCB, LTE Band 25 duplexer and GNSS LNA.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports WCDMA Band 2/4/5, LTE (QPSK, 16QAM, 64QAM) Band 2/4/5/7/12/13/14/17/25/26/30/38/41/66/71 and intra-band contigous carrier aggregation CA_5B, CA_7C, CA_38C, CA_41C, CA_66B,CA_66C. This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P175G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.12W/kg and 1.26W/kg, respectively.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure along with the added UNII-4 band of WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P175G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.12W/kg and 1.26W/kg, respectively. |
| various | Class II permissive change for adding new vendor of PCB, LTE Band 25 duplexer and GNSS LNA.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports WCDMA Band 2/4/5, LTE (QPSK, 16QAM, 64QAM) Band 2/4/5/7/12/13/14/17/25/26/30/38/41/66/71 and intra-band contigous carrier aggregation CA_5B, CA_7C, CA_38C, CA_41C, CA_66B, CA_66C. This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P126F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.11W/kg, respectively.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure along with the added UNII-4 band of WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P126F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.11W/kg, respectively. |
| various | Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports LTE (QPSK, 16QAM, 64QAM) Band 48 This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P126F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.11W/kg, respectively.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure along with the added UNII-4 band of WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P126F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.11W/kg, respectively. |
| various | Class II permissive change for adding new vendor of PCB, LTE Band 25 duplexer and GNSS LNA.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports WCDMA Band 2/4/5, LTE (QPSK, 16QAM, 64QAM) Band 2/4/5/7/12/13/14/17/25/26/30/38/41/66/71 and intra-band contigous carrier aggregation CA_5B, CA_7C, CA_38C, CA_41C, CA_66B,CA_66C. This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P174G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.47W/kg, respectively.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure along with the added UNII-4 band of WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P174G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.47W/kg, respectively. |
| various | Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports LTE (QPSK, 16QAM, 64QAM) Band 48 This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P174G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.47W/kg, respectively.
Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure along with the added UNII-4 band of WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P174G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.47W/kg, respectively. |
| various | Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports LTE (QPSK, 16QAM, 64QAM) Band 48 This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P174G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.47W/kg, respectively. |
| various | Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports LTE (QPSK, 16QAM, 64QAM) Band 48 This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P175G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.49W/kg and 1.14W/kg, respectively. |
| various | Class II permissive change for adding new vendor of PCB, LTE Band 25 duplexer and GNSS LNA.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports WCDMA Band 2/4/5, LTE (QPSK, 16QAM, 64QAM) Band 2/4/5/7/12/13/14/17/25/26/30/38/41/66/71 and intra-band contigous carrier aggregation CA_5B, CA_7C, CA_38C, CA_41C, CA_66B,CA_66C. This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P174G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.47W/kg, respectively. |
| various | Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports LTE (QPSK, 16QAM, 64QAM) Band 48 This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P126F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.11W/kg, respectively. |
| various | Class II permissive change for adding new vendor of PCB, LTE Band 25 duplexer and GNSS LNA.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports WCDMA Band 2/4/5, LTE (QPSK, 16QAM, 64QAM) Band 2/4/5/7/12/13/14/17/25/26/30/38/41/66/71 and intra-band contigous carrier aggregation CA_5B, CA_7C, CA_38C, CA_41C, CA_66B,CA_66C. This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P126F, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10W/kg and 1.11W/kg, respectively. |
| various | Class II permissive change for adding new vendor of PCB, LTE Band 25 duplexer and GNSS LNA.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports WCDMA Band 2/4/5, LTE (QPSK, 16QAM, 64QAM) Band 2/4/5/7/12/13/14/17/25/26/30/38/41/66/71 and intra-band contigous carrier aggregation CA_5B, CA_7C, CA_38C, CA_41C, CA_66B,CA_66C. This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: PD9AX211D2) co-location in the host of DELL Portable Computer, model: P175G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.12W/kg and 1.26W/kg, respectively. |
| various | Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports LTE (QPSK, 16QAM, 64QAM) Band 48 This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: E2K-RTL8852BE or PD9AX211NG) co-location in the host of DELL Portable Computer, model: P182G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.84W/kg and 1.56W/kg, respectively. |
| various | Class II permissive change for adding new vendor of PCB, LTE Band 25 duplexer and GNSS LNA.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports WCDMA Band 2/4/5, LTE (QPSK, 16QAM, 64QAM) Band 2/4/5/7/12/13/14/17/25/26/30/38/41/66/71 and intra-band contigous carrier aggregation CA_5B, CA_7C, CA_38C, CA_41C, CA_66B,CA_66C. This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure along with the WLAN module (FCC ID: E2K-RTL8852BE or PD9AX211NG) co-location in the host of DELL Portable Computer, model: P182G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.34W/kg and 1.56W/kg, respectively. |
| various | Class II permissive change for adding new vendor of PCB, LTE Band 25 duplexer and GNSS LNA.
Single Module approval is filing. Output power Listed is maximum Conducted Power. Module supports WCDMA Band 2/4/5, LTE (QPSK, 16QAM, 64QAM) Band 2/4/5/7/12/13/14/17/25/26/30/38/41/66/71 and intra-band contigous carrier aggregation CA_5B, CA_7C, CA_38C, CA_41C, CA_66B,CA_66C. This module is designed for mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| various | Single Module approval is filing. Output power Listed is maximum Conducted Power.
Module supports LTE (QPSK, 16QAM, 64QAM) Band 48 This module is designed for
mobile device application and only documented Antenna and permitted gain can be used in
OEM installation. Use of additional antenna(s) are subject to the requirements of
15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must
be provided with antenna installation instructions to satisfy RF exposure compliance. the
antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 20cm from all persons. This grant is valid only when the device is sold to OEM
integrators and the OEM integrators are instructed to ensure that the end user has no
manual instructions to remove or install the device. |
| various | Is there an equipment authorization waiver associated with this application? | No |
| various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
various
|
Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
|
various
|
Sporton International Inc. (Kunshan)
|
|
various
|
Sporton International Inc. Wensan Laboratory
|
|
various
|
Name |
R**** C******
|
|
various
|
J******** T******
|
|
various
|
A**** C********
|
|
various
|
Telephone Number |
+886-********
|
|
various
|
+86 0********
|
|
various
|
+886-********
|
|
various
|
Fax Number |
+886-********
|
|
various
|
+886-********
|
|
various
|
E-mail |
r******@bureauveritas.com
|
|
various
|
J******@sporton.com.tw
|
|
various
|
a******@sporton.com.tw
|
|