FCC ID: E2KFM101RGL LTE Module

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6998043.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.155.25Ghz band are restricted to indoor usage only. Radiation Exposure Statement:

This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Prohibited for control of or communications with unmanned aircraft systems, including drones. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1) 2) this device may not cause interference, and this device must accept any interference, includ ing interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

1) 2) l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built- in radios. Cet appareil et son antenne ne doivent pas tre situs ou fonctionner en conjonction avec une autre antenne ou un autre metteur, exception faites des radios intgres qui ont t testes. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

Devices shall not be used for control of or communications with unmanned aircraft systems. Les dispositifs ne doivent pas tre utiliss pour commander des systmes daronef sans pilote ni pour communiquer avec de tels systmes. Radiation Exposure Statement:

The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Dclaration d'exposition aux radiations:

Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si l'appareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible.

FIDCCON FM101R-GL 12 IMEI ;S/N 6*6 cn @ B [eRe CE Ste ANATEL:XXXXXXXXXX CMIIT ID:XXXXXXXXXX 1C:21374- FM101RGL FCC ID:E2KFM101RGL S/N:XXXXXXXXXXK e@ IMEI:XXXXXXXXXXXXXXX XXXXXXXXXXXXX BLES, ARH ad Fibocom Wireless Inc. Made in China 9/d BURID UL OPE XXOOOOOOOOOOOXXX ISN OU] SSB/uIM WOOO! XXOOXOOXOKXKX'NS:

HEE BARBER TOYLOLWANZ3*

|<) Reeregooncon YD) ouroins->

D> XXXXXXXXXX:CI LIND XXXXXXXXXX:TALVNG cco ]) GD SA ra 79-ULOLWS WO>0QI4 DIG

Dell Inc. MS: PS4-30 One Dell Way Round Rock, Texas 78682 www.dell.com Don Bobo Distingished Member of Technical Staff EMC, Global Regulations and Standards Telephone 512.593.8560 e-mail don.bobo@dell.com Worldwide Regulatory Compliance Engineering & Environmental Affairs Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 January 9, 2023 FCC authorization letter for Dell Regulatory employees To whom it may concern, I, the undersigned, as the authorized signatory for the Dell Inc. grantee code E2K, hereby authorize the following EMC & Wireless Regulatory Engineers of Dell Inc., to act on my behalf in all manners relating to processes required according to FCC rules for equipment authorization:

Bill Wang April Chang Fiona Y Chen Kay Chen Yan Papernov Jessie Goh Jack TS Huang Tommy Hwang Nai Ghee Koh Jason KP Lee Jason Limoges Leonel Lopez James V Nguyen Rex Wan William Wei Steve L Williams Julie Shen Leo Hong Dyllan Chang Ken Tai CY Chang Jessie Lin Greg Hsiao Chloe Lin Brad Chen This authorization shall be sent along with application when filing with the FCC Certification Division and is valid until further written notice from the applicant. If you have any questions or need additional information, please feel free to contact me at 512-593-8560 or 512-619-7976. Sincerely, Don Bobo, Dell Inc., FRN: 0008359580 Internal Use - Confidential

Global Regulatory Compliance Federal Communications Commission Office of Engineering and Technology Equipment Authorization and Evaluation Division 7435 Oakland Mills Road Columbia MD 21046 ALIN. neviewing Engineer Subject: Agent Appointment & Attestation Statement FCC ID: E2KFM101RGL Reference: a) FCC CFR 2.911(d)(5)(i) b) FCC CFR 2.911(d)(5)(ii) c) FCC CFR 2.911(d)(7) a) DELLInc. (the applicant) certifies that the equi Covered equipment prohibited from receiving Title 47;

b) DELL Inc. (the applicant) certifies that, as of thi not identified on the Covered List pursuant to affiliate of a specifically named entity) producing c) DELL Inc. (the applicant) hereby accepts and d engineering & Environmental Affairs Date: 2023-10-03 pment for which authorization is sought is not an equipment authorization pursuant to 2.903 of CFR 2 date of the filing of the application, the applicant is 1.50002 of CFR Title 47, as an entity (nor a subsidiary or Covered equipment;

2signates the following agent for service of process in the United States for matters related to the appl maintain the designated agent for service of pro either the grantee has permanently terminated equipment within the U.S., or upon the conclusic proceedings involving the equipment, whichever Agent Designation:

Company name: DELL Inc. Street Address: One Dell Way City/Province/Zip: Round Rock, TX 78682, USA Contact Name: Don Bobo Telephone No: +1 (512) 593 8560 Email: don_bobo@dell.com FRN: 0008359580 Signature of Designated Agent/Applicant:

Printed name: Don Bobo Title: Distinguished Member Technical Staff RQFO401 icable equipment and accepts the obligation to cess in the United States for no less than one year after all marketing and importation of the applicable on of any Commission related administrative or judicial is the latter.

Dell Customer Communication - Confidential FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 To whom it may concern, Date: September 01, 2022 This Change of Identification request applies for a new FCC ID as established in 47 CFR 2.933 for a currently approved device. This application by DELL Inc. will establish a new FCC ID:

E2KFM101RGL under DELL Inc. grantee code for the purpose of marketing. The original grant to Fibocom Wireless Inc. will remain in effect. Per 2.933(b) 1. The original identification is ZMOFM101RGL. 2. The original grant date is 8/20/2023. 3. The equipment is electrically identical. Only the trade name and FCC ID number are different. 4. The original test results continue to be representative of and applicable to the equipment bearing the changed identification. 5. Exterior photographs are included in this application. The following files are electronically submitted as attachments:

Cover Letter External Photos FCC ID label format and location Should there be any question, please feel free to contact us. Sincerely yours, Wireless Regulatory Engineer Dell Technologies | Global Product Compliance and Environmental Affairs Telephone No: +886 2 2376 3433 Email: Kay.Chen@dell.com

egula Federal Communications Commission Office of Engineering and Technolgy Equipment Authorizatin and Evaluatin Division 7435 Oakland Mills Rad Columbia MD 21046 ATIN: Reviewing Engineer Subject: Agent Appintment & Attestation Statement FCC ID: E2KFM350GL Reference:

a) FCC CFR 2.911(d)(S)(i) b) FCC CFR 2.911(d)(S)(ii) c) FCC CFR 2.911(d)(7) Date: 02 June 2023 a) DELL Inc. he applicant certifies that the equipment for which authrization is sought is not cvered equipment prohibited from receiving an equipment authrization pursuant to 2.903f CFR Title 47;

b) DELL Inc. he applicant certifies that, as of the date f the filing f the applicatin, the applicant is not identified on the cvered List pursuant t 1.50002f CFR Title 47, as an entity (nr a subsidiary r affiliatef a specificallnamed entity) producing "Cvered equipment;

c) DELL Inc. ("the applicant hereby accepts and designates the fIIwing agent fr service f process in the United States fr matters related t the applicable equipment and accepts the bligatin t maintain the designated agent fr service f process in the United States for no less than one year after either the grantee has permanently terminated all marketing and imprtatin of the applicable equipment within the U.S.r upn the cnclusinf any cmmissin related administrative r judicial prceedings invlving the equipment, whichever is the latter. Agent Designation:

cmpany name: DELL Inc. Street Address: One Dell Way City/Prvince/Zip:Round Rock, TX 78682, USA cntact Name: Don Bobo Telephone N1 (512) 593 8560 Email: don bbdell.com FRN:0008359580 Signature f Designated Agent/ Applicant:

Printed name: Don Bb Title: Distinguished Member Technical Staff RQF0401

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Dell Inc Address Grantee Code FCC ID One Dell Way Round Rock Texas United States 78682 E2K E2KFM101RGL Authorized Contact Name Kay.Chen Contact Email Contact Phone Kay.Chen@dell.com

+886 2 2376 3433 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c) d) e) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) g) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Dell Inc (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Dell Inc (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature:

Date: Spe 9,2023 Print Name:

Title:

Kay.Chen Wireless Regulatory Engineer

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021

Fibocom Wireless Inc. 1101,Tower A, Building 6, Shenzhen International, Innovation Valley, Dashi 1st Rd, Nanshan, ShenZhen, China Tel: +8675526733555, Fax: +86-755-26520841 Date: Sep 10, 2023 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 To whom it may concern, This letter grants authorization for representatives of DELL Inc. to apply to the FCC for a change in identification as specified under 47 CFR 2.933 of the FCC rules. This authorization applies to Module FCC ID: ZMOFM101RGL, original grant date 18/08/2023. We are aware that DELL Inc. intends to market the above referred product under FCC ID: E2KFM101RGL. The original test results continue to be representative of and applicable to the equipment bearing the changed identification. Should there be any question, please feel free to contact us. Sincerely yours, Patrick Ma Certification Director Fibocom Wireless Inc. E-mail: mapx@fibocom.com