companies    

FCC ID: E2KAX201D2 Intel WiFi 6 AX201

by: Dell Inc. latest update: 2019-07-24 model: AX201D2

Seven grants have been issued under this FCC ID from 05/14/2019 to 07/24/2019 (this is one of nineteen releases in 2019 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked troubleshooting guides, warrantee terms, password defaults, instructions, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
manuals label
app s submitted / available
1 2 3 4 5 6 7 User Manual-1 Users Manual pdf 151.84 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 User Manual-2 Users Manual pdf 2.86 MiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 ID Label and Location ID Label/Location Info pdf 378.69 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 C2PC Request Letter Cover Letter(s) pdf 121.43 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 Confidentiality Request Letter Cover Letter(s) pdf 141.44 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 Declaration Letter Attestation Statements pdf 37.17 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 Power of Attorney Letter Cover Letter(s) pdf 210.34 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 SAR Report-1 RF Exposure Info pdf 5.27 MiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 SAR Report-2 RF Exposure Info pdf 5.68 MiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 SAR Report-3 RF Exposure Info pdf 2.81 MiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 SAR Report-4 RF Exposure Info pdf 4.98 MiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 Test Setup Photos SAR Test Setup Photos pdf 297.91 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7
Cover Letter(s) pdf
1 2 3 4 5 6 7
Cover Letter(s) pdf
1 2 3 4 5 6 7 User Manual-1 Users Manual pdf 151.84 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 User Manual-2 Users Manual pdf 2.86 MiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 ID Label and Location ID Label/Location Info pdf 378.69 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 C2PC Request Letter Cover Letter(s) pdf 121.43 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 Confidentiality Request Letter Cover Letter(s) pdf 141.44 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 Declaration Letter Attestation Statements pdf 37.17 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 Power of Attorney Letter Cover Letter(s) pdf 210.34 KiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 SAR Report-1 RF Exposure Info pdf 5.27 MiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 SAR Report-2 RF Exposure Info pdf 5.68 MiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 SAR Report-3 RF Exposure Info pdf 2.81 MiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 SAR Report-4 RF Exposure Info pdf 4.98 MiB May 27 2019 / July 24 2019
1 2 3 4 5 6 7 Test Setup Photos SAR Test Setup Photos pdf 297.91 KiB May 27 2019 / July 24 2019

frequency equipment class purpose
1 2019-07-24 5775 ~ PowerOutput NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
2 2422 ~ PowerOutput DTS - Digital Transmission System
3 2402 ~ PowerOutput DSS - Part 15 Spread Spectrum Transmitter
4 2019-05-14 2422 ~ 2462 DTS - Digital Transmission System Change in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018
5 5190 ~ 5230 NII - Unlicensed National Information Infrastructure TX
6 JBP - Part 15 Class B Computing Device Peripheral
7 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
1 2 3 4 5 6 7 Effective 2019-07-24
1 2 3 4 5 6 7 2019-05-14
1 2 3 4 5 6 7 Applicant's complete, legal business name Dell Inc.
1 2 3 4 5 6 7 FCC Registration Number (FRN) 0008359580
1 2 3 4 5 6 7 Physical Address One Dell Way
1 2 3 4 5 6 7 Round Rock, Texas 78682
1 2 3 4 5 6 7 United States
app s TCB Information
1 2 3 4 5 6 7 TCB Application Email Address s******@nemko.com
1 2 3 4 5 6 7 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3 4 5 6 7 A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
1 2 3 4 5 6 7 Grantee Code E2K
1 2 3 4 5 6 7 Equipment Product Code AX201D2
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 7 Name R******** W******
1 2 3 4 5 6 7 Title Regulatory Engineer
1 2 3 4 5 6 7 Telephone Number 512-7********
1 2 3 4 5 6 7 Fax Number 512-2********
1 2 3 4 5 6 7 E-mail R******@dell.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 6 7 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 7 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)01/21/2020
1 2 3 4 5 6 7 11/11/2019
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 7 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 7 Equipment ClassNII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 7 DTS - Digital Transmission System
1 2 3 4 5 6 7 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 7 JBP - Part 15 Class B Computing Device Peripheral
1 2 3 4 5 6 7 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel WiFi 6 AX201
1 2 3 4 5 6 7 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
1 2 3 4 5 6 7 No
1 2 3 4 5 6 7 Modular Equipment TypeDoes not apply
1 2 3 4 5 6 7 Limited Single Modular Approval
1 2 3 4 5 6 7 Single Modular Approval
1 2 3 4 5 6 7 Purpose / Application is forClass II permissive change or modification of presently authorized equipment
1 2 3 4 5 6 7 Change in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018
1 2 3 4 5 6 7 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 7 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 7 Grant CommentsPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of DELL Portable Computer, model: P103G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.19 W/kg and 1.31 W/kg, respectively.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of DELL Portable Computer, model: P103G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.98 W/kg and 1.16 W/kg, respectively.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of DELL Portable Computer, model: P103G, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.26 W/kg and 1.31 W/kg, respectively.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
1 2 3 4 5 6 7 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 7 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 7 Firm Name Intel Corporation S.A.S.
1 2 3 4 5 6 7 Name N**** A******
1 2 3 4 5 6 7 Telephone Number 00334********
1 2 3 4 5 6 7 Fax Number 00334********
1 2 3 4 5 6 7 E-mail n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E 38 CC MO 5180 5240 0.145
1 2 15E 38 CC MO 5190 5230 0.13
1 3 15E 38 CC MO 5210 5210 0.095
1 4 15E 38 CC MO 5250 5250 0.084
1 5 15E 38 CC MO ND 5260 5320 0.145
1 6 15E 38 CC MO ND 5270 5310 0.124
1 7 15E 38 CC MO ND 5290 5290 0.086
1 8 15E 38 CC MO ND 5500 5700 0.141
1 9 15E 38 CC MO ND 5510 5670 0.138
1 1 15E 38 CC MO ND 5530 5690 0.15
1 11 15E 38 CC MO ND 5710 5710 0.149
1 12 15E 38 CC MO ND 5720 5720 0.105
1 13 15E 38 CC MO 5745 5825 0.139
1 14 15E 38 CC MO 5755 5795 0.135
1 15 15E 38 CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.007
2 2 15C CC MO 2412 2472 0.955
2 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0100000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.007
4 2 15C CC MO 2412 2472 0.955
4 3 15C CC MO 2422 2462 0.58
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E 38 CC MO 5180 5240 0.145
5 2 15E 38 CC MO 5190 5230 0.13
5 3 15E 38 CC MO 5210 5210 0.095
5 4 15E 38 CC MO 5250 5250 0.084
5 5 15E 38 CC MO ND 5260 5320 0.145
5 6 15E 38 CC MO ND 5270 5310 0.124
5 7 15E 38 CC MO ND 5290 5290 0.086
5 8 15E 38 CC MO ND 5500 5700 0.141
5 9 15E 38 CC MO ND 5510 5670 0.138
5 1 15E 38 CC MO ND 5530 5690 0.15
5 11 15E 38 CC MO ND 5710 5710 0.149
5 12 15E 38 CC MO ND 5720 5720 0.105
5 13 15E 38 CC MO 5745 5825 0.139
5 14 15E 38 CC MO 5755 5795 0.135
5 15 15E 38 CC MO 5775 5775 0.109
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0100000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2BCFF-6318 Rochester Sensors LLC 2BF38-012-2402 ShanTou City XingBao Technology Co., Ltd. 2BF7L-BD002 BADI TOYS FACTORY 2BGAA-ST51K2430 Shenzhen Yunhuaxin Keji Youxiangongsi 2AQZQ-SPINFIRE Fry Developments Pty Ltd

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC