Dell Cast Adapter User's Manual Marketing model : Dell Cast Adapter Regulatory model : BEL01 Regulatory type : BEL01001
. NOTE: A NOTE indicates important information that helps you make better use of your Dell Cast Adapter CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. 2014 Dell Inc. All rights reserved. Information in this document is subject to change without notice. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text:
Dell, the DELL logo, and Venue are trademarks of Dell Inc. Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under license. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. 2014 7 Rev. A00 Features 4 1 2 3 1. HDMI port 2. Reset pinhole 3. USB port 4. Micro-USB port Part 1. 2. 3. 4. HDMI port Reset Pinhole USB port Micro-USB port Functionality Plugs into any HDMI port on your TV , Monitor , Projector Reset your device to default setting Can plug in mouse , keyboard, USB HUB Connect the USB cable to provide power to your Dell Cast Adapter Features 3 Step Your Dell Cast Adapter NOTE: Your Dell Cast Adapter may can't power on when you provide the power from a stander USB port of other devices and the Device go into sleep mode. please avoid the device going into sleep made. 1.Connect the HDMI dongle to a HDMI-in port your Dell Cast Adapter plugs into any HDMI port on you TV, Monitor, Projector A HDMI extender is Optional ,and can be used if your into your TV, Monitor, Projector it may also be used to inprove your WI-fi reception.attach between your Dell Cast Adapter and your TV, Monitor, Projector does not fit directly Dell Cast Adapter 2.Connect the power cable 1. Connect the micro-USB end of the USB cable to the USB port of the Dell Cast Adapter. 2. The other end of the USB cable plugs into either a USB port on your TV, Monitor, Projector, or the power supply. 3. the power supply is optional, and can be used with the USB cable to power your Dell Cast Adapter if your TV, Monitor, Projector does not have a USB port. 4 Step your D ell Cast Adapter Connect keyboard, mouse, HUB, NOTE: Make sure your TV, Monitor, Projector select HDMI channel . Connect to the Dell Cast Connect to the Dell Cast Productivity Mode 1. Open the 2. Dell Cast In the ADAPTERS. Dell Cast app on your tablet. app window, select the Dell Cast under 3. Tap Productivity Mode and follow the instructions on screen. Miracast 1. Open WiFi on your tablet. 2. 3. select the HDMI dongle under
. In the Cast Screen window, Enable wireless display, ADAPTERS and go into Screen Cast. Connect to the HDMI dongle 5 Warnings to users Dell Cast Adapter may get hot to the touch; this is normal, Unplug power source and let it cool before removing it from your television. Use only the cables provided with your deciveto plut source.Using other cables may damage Dell Cast Adapter Dell Cast Adapter into a power and /or your television. Dell Cast Adapter
's Dell Cast Adapter to water or extreme conditions(heat,cold,dust),as Do not expose Dell Cast Adapter may malfunction or cease to work when exposed to such elements. Do not attempt to disassemble or repair limited warranty and could harm you, your television ,and/or Dell Cast Adapter is an entertainment device; it is not designed, manufactured or intended for use in hazardous enciroments requiring fail-safe performance in which the failure of physical or environmental damage. could lead directly to death, personal injury,or servere yourself. Doing so voids the Dell Cast Adapter Dell Cast Adapter Dell Cast Adapter
. 6 Warnings to users NOTE: The Manufacture is not responsible for any radio or TV interference caused by unauthourized modifications to this equipment. such modifications could void the user's authority to operate the equipment. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate Dell cast adapter or warranty. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Industry Canada licence-exempt RSS-210 standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada RSS-210 applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This device complies with RSS-210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. Cet appareil numrique de la Classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. The device for operation in the band 5150-5250 MHZ is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite system. Les dispositifs fonctionnant dans la bande 5.15-5.25GHz sont reserves uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux syst mes de satellites mobiles utilisant les mmes canaux. The maximum antenna gain 2.52 dBi permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-topoint operation as appropriate. Le gain d'antenne maximal autoris pour le dispositifest 2,52 dBi, pour se conformer la limite de p.i.r.e. en et 5725-5825 MHz spcifie pour un fonctionnement point point. High-power radars are allocated as primary users (i.e. priority users) of the bands 5.65 to 5.85GHz and that these radars could cause interference and/or damage to LE-LAN devices. Les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bandes 5.65-5.85GHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LANEL. Complies with the Canadian ICES-003 Class B specifications. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Certication Information for CE Statement These devices complied with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directive and Directive 2004/108/EC Troubleshooting Connect to the HDMI dongle 7 Specifications Marketing model Regulatory model Regulatory type Temprature range Dimensions:
Height Width Depth Dell Cast Adapter BEL01 BEL01001 0 C - 40 C (30 F -104 F) 73 mm 28 mm 10 mm 8 Specifications