FCC ID: TLZ-CM389NF IEEE 802.11 2x2 MIMO a/b/g/n/ac Wireless LAN + Bluetooth + NFC NGFF Module

by: AzureWave Technologies, Inc. latest update: 2019-02-01 model: CM389NF

Forty One grants have been issued under this FCC ID from 07/09/2014 to 02/01/2019 (this is one of eleven releases in 2019 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked troubleshooting guides, warrantee terms, drivers, instructions, & password defaults.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Manual Users Manual pdf 2.80 MiB
various Manual - FCC Statement Users Manual pdf 735.65 KiB
various User manual Regulatory Information and Safety Guide Users Manual pdf 1.61 MiB
various Users Manual Users Manual pdf 636.84 KiB
various user manual Users Manual pdf 1.26 MiB January 02 2019 / January 08 2019
various Cover Letter(s) pdf January 02 2019
various Cover Letter(s) pdf January 02 2019
various External Photos pdf January 02 2019 / January 08 2019
various Cover Letter(s) pdf January 02 2019
various Cover Letter(s) pdf January 02 2019
various RF Exposure Info pdf January 02 2019
various Internal Photos pdf January 02 2019 / January 08 2019
various RF Exposure Info pdf January 02 2019
various RF Exposure Info pdf January 02 2019
various RF Exposure Info pdf January 02 2019
various Test Setup Photos pdf January 02 2019 / January 08 2019
various ID Label/Location Info pdf January 02 2019
various External Photos pdf
various Internal Photos pdf
various ID Label/Location Info pdf
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Internal Photos pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Test Report pdf
various Test Setup Photos pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Test Report pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Test Report pdf
various Test Report pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various External Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various Internal Photos pdf
various ID Label/Location Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf / March 10 2016
various Cover Letter(s) pdf / March 10 2016
various Test Setup Photos pdf
various Cover Letter(s) pdf / March 10 2016
various Cover Letter(s) pdf / January 07 2016
various Cover Letter(s) pdf / January 07 2016
various Cover Letter(s) pdf / January 07 2016
various RF Exposure Info pdf / January 07 2016
various Test Report pdf / January 07 2016
various Cover Letter(s) pdf / January 07 2016
various Cover Letter(s) pdf / January 07 2016
various Cover Letter(s) pdf / January 07 2016
various Cover Letter(s) pdf / January 07 2016
various RF Exposure Info pdf / January 07 2016
various Test Report pdf / January 07 2016
various Test Report pdf / January 07 2016
various Cover Letter(s) pdf May 10 2015
various Cover Letter(s) pdf May 10 2015
various Cover Letter(s) pdf May 10 2015
various Cover Letter(s) pdf May 10 2015
various Cover Letter(s) pdf May 10 2015
various RF Exposure Info pdf May 10 2015
various Test Report pdf May 10 2015
various Test Setup Photos pdf May 10 2015
various Cover Letter(s) pdf
various Internal Photos pdf / November 01 2016
various Internal Photos pdf / November 01 2016
various Internal Photos pdf / November 01 2016
various Internal Photos pdf / November 01 2016
various Test Setup Photos pdf / November 01 2016
various RF Exposure Info pdf
various Test Setup Photos pdf / November 01 2016
various Manual Users Manual pdf 2.80 MiB
various Manual - FCC Statement Users Manual pdf 735.65 KiB
various Users Manual Users Manual pdf 636.84 KiB
various user manual Users Manual pdf 1.26 MiB January 02 2019 / January 08 2019

frequency equipment class purpose
1 2019-02-01 2412 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
4 2018-10-13 5660 ~ 5700 NII - Unlicensed National Information Infrastructure TX
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 5745 ~ 5825 DTS - Digital Transmission System
7 2018-08-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
8 13.56 ~ 13.56 DXX - Part 15 Low Power Communication Device Transmitter
9 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
10 2412 ~ 2462 DTS - Digital Transmission System
11 2018-08-23 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
12 13.56 ~ 13.56 DXX - Part 15 Low Power Communication Device Transmitter
13 2412 ~ 2462 DTS - Digital Transmission System
14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
15 2017-05-24 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
17 2412 ~ 2462 DTS - Digital Transmission System
18 2017-02-22 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
19 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
20 2412 ~ 2462 DTS - Digital Transmission System
21 2016-10-03 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
22 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
23 2412 ~ 2462 DTS - Digital Transmission System
24 13.56 ~ 13.56 DXX - Part 15 Low Power Communication Device Transmitter
25 2016-07-01 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
27 2412 ~ 2462 DTS - Digital Transmission System
28 2015-10-05 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
29 2015-07-15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
30 2412 ~ 2462 DTS - Digital Transmission System
31 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
32 2015-04-09 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
33 2412 ~ 2462 DTS - Digital Transmission System
34 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
35 2014-09-04 5745 ~ 5825 DTS - Digital Transmission System
36 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
37 5660 ~ 5700 NII - Unlicensed National Information Infrastructure TX
38 2014-07-09 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Original Equipment
39 5660 ~ 5700 NII - Unlicensed National Information Infrastructure TX
40 13.56 ~ 13.56 DXX - Part 15 Low Power Communication Device Transmitter
41 5745 ~ 5825 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2019-02-01
various 2018-10-13
various 2018-08-29
various 2018-08-23
various 2017-05-24
various 2017-02-22
various 2016-10-03
various 2016-07-01
various 2015-10-05
various 2015-07-15
various 2015-04-09
various 2014-09-04
various 2014-07-09
various Applicant's complete, legal business name AzureWave Technologies, Inc.
various FCC Registration Number (FRN) 0013946611
various Physical Address 8F., No. 94, Baozhong Rd.
various Xindian Dist., New Taipei City, N/A
various Taiwan
app s TCB Information
various TCB Application Email Address c******@micomlabs.com
various T******@intertek.com
various t******@siemic.com
various c******@telefication.com
various t******@timcoengr.com
various T******@TIMCOENGR.COM
various c******@curtis-straus.com
various s******@nemko.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code TLZ
various Equipment Product Code CM389NF
app s Person at the applicant's address to receive grant or for contact
various Name P******** L******
various Title Director
various Telephone Number 02-55******** Extension:
various Fax Number 02-66********
various E-mail p******@azurewave.com
app s Technical Contact
various Firm Name AzureWave Technologies, Inc.
various Compliance Certification Services (Kunshan) Inc.
various SGS Taiwan Ltd.
various Name J****** F********
various W******** C****
various Physical Address No. 10, Weiye Rd, Innovation Park
various No. 10 Weiye Rd, Innovation Park
various 134, Wu Kung Rd., Wuku Industrial Zone
various Kunshan, Jiangsu, 215300
various Taiwan
various China
various Telephone Number 86 51********
various 86-51********
various 88622********
various Fax Number 86 51********
various 86-51********
various 88622********
various E-mail p******@azurewave.com
various j******@ccsrf.com
various w******@sgs.com
app s Non Technical Contact
various Firm Name Compliance Certification Services (Kunshan) Inc.
various SGS Taiwan Ltd.
various Name M****** L********
various W****** C****
various Physical Address No. 10, Weiye Rd, Innovation Park
various No. 10 Weiye Rd, Innovation Park
various 134, Wu Kung Rd., Wuku Industrial Zone
various Kunshan, Jiangsu, 215300
various Kunshan, Jiangsu
various China
various Taiwan
various Telephone Number 86 51********
various 86-51********
various 88622********
various Fax Number 86 51********
various 86-51********
various 88622********
various E-mail m******@ccsrf.com
various M******@ccsrf.com
various w******@sgs.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)08/01/2019
various11/20/2017
various08/14/2017
various03/21/2017
various10/30/2016
various01/30/2016
various01/11/2016
various10/06/2015
various03/02/2015
various08/31/2014
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousDXX - Part 15 Low Power Communication Device Transmitter
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)IEEE 802.11 2x2 MIMO a/b/g/n/ac Wireless LAN + Bluetooth + NFC NGFF Module
variousIEEE 802.11 2X2 MIMO a/b/g/n/ac Wireless LAN + Bluetooth + NFC NGFF Module
variousIEEE 802.11 2X2 MIMO a/b/g/n/ac Wireless LAN +Bluetooth + NFC NGFF Module
variousIEEE802.11 2X2 MIMO a/b/g/n/ac Wireless LAN+Bluetooth+NFC NGFF Module
variousIEEE 802.11 2X2 MIMO a/b/g/n/ac Wireless LAN + Bluetooth + NFC NGFF Module
variousIEEE802.11 2X2 MIMO a/b/g/n/ac Wireless LAN + Bluetooth + NFC NGFF Module
variousMarvell 88W8897 802.11ac 2x2Wi-Fi+BT Combo Adapter
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousLimited Single Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II change: Module is integrated in new host Notebook Computer with brand name Lenovo 300e Chromebook 2nd Gen MTK and model no: 81QC. Single Modular Approval. Power listed is the maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. SAR compliance for portable use conditions has been evaluated as described in this filing. The highest reported SAR values for body-worn accessory and simultaneous transmission exposure conditions are 0.13 W/kg and 1.57 W/kg, respectively.
variousClass II change: Module is integrated in new host Notebook Computer with brand name Lenovo 300e Chromebook 2nd Gen MTK and model no: 81QC. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. SAR compliance for portable use conditions has been evaluated as described in this filing. The highest reported SAR values for body-worn accessory and simultaneous transmission exposure conditions are 0.15 W/kg and 1.57 W/kg, respectively.
variousClass II change: Module is integrated in new host Notebook Computer with brand name Lenovo 300e Chromebook 2nd Gen MTK and model no: 81QC. Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. SAR compliance for portable use conditions has been evaluated as described in this filing. The highest reported SAR values for body-worn accessory and simultaneous transmission exposure conditions are 1.06 W/kg and 1.57 W/kg, respectively.
variousClass II Permissive Change to add an antenna in a host device. Output power listed is maximum combined conducted output power. This device is a mobile device with respect to RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as in accordance with FCC multi- transmitter product guidelines. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
variousClass II Permissive Change to add an antenna in a host device. Output power listed is conducted. This device is a mobile device with respect to RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as in accordance with FCC multi- transmitter product guidelines. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousClass II Permissive Change to add an antenna in a host device. Output power listed is maximum combined conducted output power. This device is a mobile device with respect to RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except as in accordance with FCC multi- transmitter product guidelines. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousC2PC Approval for adding a host (Lenovo Chromebook S330, 81JW) to the certified module; Output Power listed is conducted. The antenna can not be co-located or operating in conjunction with any other antenna or transmitter. Highest reported SAR for Body and Simultaneous Transmission is: 0.03 W/kg and 0.25 W/kg.
variousC2PC Approval for adding a host (Lenovo Chromebook S330, 81JW) to the certified module.
variousC2PC Approval for adding a host (Lenovo Chromebook S330, 81JW) to the certified module; Output Power listed is conducted (2*2 MIMO). The antenna can not be co-located or operating in conjunction with any other antenna or transmitter. The device has 20MHz/ 40MHz/ 80MHz bandwidth. Highest reported SAR for Body and Simultaneous Transmission is: 0.25 W/kg and 0.25 W/kg.
variousC2PC Approval for adding a host (Lenovo Chromebook S330, 81JW) to the certified module; Output Power listed is maximum combined conducted(2*2 MIMO); The antenna can not be co-located or operating in conjunction with any other antenna or transmitter. The device has 20MHz and 40MHz bandwidth. Highest reported SAR for Body and Simultaneous Transmission is: 0.25 W/kg and 0.25 W/kg.
variousC2PC Approval for adding a host (Lenovo Chromebook C330, 81HY) to the certified module; Output Power listed is maximum combined conducted(2*2 MIMO); The antennas can not be co-located or operating in conjunction with any other antenna or transmitter. The device has 20MHz/ 40MHz/ 80MHz bandwidth. Highest reported SAR for Body and Simultaneous Transmission is : 0.25 W/kg and 0.25 W/kg.
variousC2PC Approval for adding a host (Lenovo Chromebook C330, 81HY) to the certified module.
variousC2PC Approval for adding a host (Lenovo Chromebook C330, 81HY) to the certified module; Output Power listed is maximum combined conducted(2*2 MIMO); The antenna can not be co-located or operating in conjunction with any other antenna or transmitter. The device has 20MHz and 40MHz bandwidth. Highest reported SAR for Body and Simultaneous Transmission is : 0.04 W/kg and 0.25 W/kg.
variousC2PC Approval for adding a host (Lenovo Chromebook C330, 81HY) to the certified module; Output Power listed is conducted. The antenna can not be co-located or operating in conjunction with any other antenna or transmitter. Highest reported SAR for Body and Simultaneous Transmission is : 0.03 W/kg and 0.25 W/kg.
variousC2PC Approval for adding a host to the certified module; Output Power listed is maximum combined conducted(2*2 MIMO); The antennas used for this transmitter must be installed to provide a seperation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The device has 20MHz , 40MHz and 80MHz bandwidth.
variousC2PC Approval for adding a host to the certified module; Output Power listed is conducted.The antennas used for this transmitter must be installed to provide a seperation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
variousC2PC Approval for adding a host to the certified module; Output Power listed is maximum combined conducted(2*2 MIMO); The antennas used for this transmitter must be installed to provide a seperation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The device has 20MHz and 40MHz bandwidth.
variousClass II change: Adding a portable platform Lenovo Regulatory Model Number: Lenovo N23 Yoga Chromebook, ZA26xxxxx; Lenovo Flex 11 Chromebook, ZA27xxxxx ("x" in the model name can be 0 to 9, A to Z, a to z, "-" or blank). Output power listed is conducted. Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 0 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The highest reported SAR value and the simultaneous SAR value(body, @ 0 mm) are : 0.105 W/kg and 0.465 W/kg respectively.
variousClass II change: Adding a portable platform Lenovo Regulatory Model Number: Lenovo N23 Yoga Chromebook, ZA26xxxxx; Lenovo Flex 11 Chromebook, ZA27xxxxx ("x" in the model name can be 0 to 9, A to Z, a to z, "-" or blank. Output power listed is conducted. Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 0 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The highest reported SAR value is : 0.561 W/kg(body , @ 0 mm). And the simultaneous SAR value(body, @ 0 mm) is : 0.465 W/kg
variousClass II change: Adding a portable platform Lenovo Regulatory Model Number: Lenovo N23 Yoga Chromebook, ZA26xxxxx; Lenovo Flex 11 Chromebook, ZA27xxxxx ("x" in the model name can be 0 to 9, A to Z, a to z, "-" or blank). Output power listed is conducted. Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 0 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The highest reported SAR value is : 0.179 W/kg(body , @ 0 mm). And the simultaneous SAR value(body, @ 0 mm) is : 0.281 W/kg This device has 20/40 MHz bandwidth modes.
variousClass II change: Module is integrated in new host Notebook Computer with brand name Acer and model no: N16Q10 Output power listed is conducted. Limited Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 0 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The simultaneous SAR value(body, @ 0 mm) is : 1.58 W/kg
variousClass II change: Module is integrated in new host Notebook Computer with brand name Acer and model no: N16Q10 The highest reported SAR value is : 1.44 W/kg(body , @ 0 mm). And the simultaneous SAR value(body, @ 0 mm) is : 1. 58 W/kg Output power listed is conducted. Limited Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 0 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20/40/80 MHz bandwidth modes.
variousClass II change: Module is integrated in new host Notebook Computer with brand name Acer and model no: N16Q10 The highest reported SAR value is : 0.99 W/kg(body , @ 0 mm). And the simultaneous SAR value(body, @ 0 mm) is : 1.59 W/kg Output power listed is conducted. Limited Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 0 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20/40 MHz bandwidth modes.
variousClass II change: Module is integrated in new host Notebook Computer with brand name Acer and model no: N16Q10 Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance and OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device has 20, 40, and 80 MHz bandwidth modes. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
variousOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 and 40 MHz bandwidth modes. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
variousClass II Permissive Change to update 5.2GHz and 5.8GHz to U-NII-1 and U-NII-3 band new rule. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
variousOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. (Original Grant date 07/09/2014) Limited Single Modular Approval. This Class II Permissive Change is limited to integrate this module into ChromeBook, Model: C11, C12, J2, J4, LT0101-01, B800, K2 and K4. SAR compliance for portable use conditions has been evaluated as described in this filing.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. (Original Grant date 07/09/2014) Limited Single Modular Approval. This Class II Permissive Change is limited to integrate this module into ChromeBook, Model: C11, C12, J2, J4, LT0101-01, B800, K2 and K4. SAR compliance for portable use conditions has been evaluated as described in this filing. The highest reported SAR values for stand-alone and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.27 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. (Original Grant date 07/09/2014) Limited Single Modular Approval. This Class II Permissive Change is limited to integrate this module into ChromeBook, Model: C11, C12, J2, J4, LT0101-01, B800, K2 and K4. SAR compliance for portable use conditions has been evaluated as described in this filing. The highest reported SAR values for stand-alone and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.28 W/kg, respectively.
variousOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. (Original Grant date 07/09/2014) Limited Single Modular approval. This Class II Permissive Change is limited to integrate this module into ChromeBook, Model: C11, J2, LT0101-01 and B800. SAR compliance for portable use conditions has been evaluated as described in this filing.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. (Original Grant date 07/09/2014) Limited Single Modular approval. This Class II Permissive Change is limited to integrate this module into ChromeBook, Model: C11, J2, LT0101-01 and B800. SAR compliance for portable use conditions has been evaluated as described in this filing. The highest reported SAR values for stand-alone and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.26 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. (Original Grant date 07/09/2014) Limited Single Modular approval. This Class II Permissive Change is limited to integrate this module into ChromeBook, Model: C11, J2, LT0101-01 and B800. SAR compliance for portable use conditions has been evaluated as described in this filing. The highest reported SAR values for stand-alone and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.28 W/kg, respectively.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. (Original Grant date 07/09/2014) Limited Single Modular approval. This Class II Permissive Change is to integrate this module into HP Notebook PC, Model: TPN-Q152. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR values for stand-alone and simultaneous transmission exposure conditions are 0.24W/kg and 0.28W/kg, respectively.
variousOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. (Original Grant date 07/09/2014) Limited Single Modular approval. This Class II Permissive Change is to integrate this module into HP Notebook PC, Model: TPN-Q152. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. (Original Grant date 07/09/2014) Limited Single Modular approval. This Class II Permissive Change is to integrate this module into HP Notebook PC, Model: TPN-Q152. SAR compliance for portable use conditions has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR values for stand-alone and simultaneous transmission exposure conditions are 0.23W/kg and 0.27W/kg, respectively.
variousOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.
variousSingle Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance and OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name UL Verification Services (Guangzhou) Co., Ltd.
various Intertek Testing Services NA
various Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch
various Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
various Compliance Certification Services (KunShan) Inc.
various SGS Taiwan Ltd.
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various SPORTON INTERNATIONAL (Shenzhen) INC.
various Sporton International Inc.
various Name S******** G****
various J******** S****
various A**** H****
various R******** C********
various K******** C********
various R**** W********
various K**** L******
various M******** L****
various A****** C********
various Telephone Number +86 0********
various 859-2********
various 86 76********
various 886-3******** Extension:
various 88633******** Extension:
various +886-******** Extension:
various +886-******** Extension:
various +886-******** Extension:
various 86-75********
various 886-3******** Extension:
various Fax Number 859 2********
various 886-3********
various 88633********
various +886-********
various +886-********
various +886-********
various 86-75********
various 886-3********
various E-mail S******@ul.com
various j******@intertek.com
various a******@cn.bureauveritas.com
various r******@tw.bureauveritas.com
various k******@tw.ccsemc.com
various R******@sgs.com
various k******@tw.bureauveritas.com
various m******@sporton.com.tw
various a******@sporton.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2412 2462 0.625
1 2 15C CC 2402 2480 0.007
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 38 CC MO 5180 5240 0.065
3 2 15E 38 CC MO 5260 5320 0.071
3 3 15E 38 CC MO 5500 5700 0.074
3 4 15E 38 CC MO 5745 5825 0.07
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.046
4 2 15E CC MO ND 5260 5320 0.07
4 3 15E CC MO ND 5500 5580 0.076
4 4 15E CC MO ND 5660 5700 0.07
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.008
6 2 15C CC MO 2412 2462 0.696
6 3 15C CC MO 5745 5825 0.542
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 13.56000000 13.56000000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E CC MO 5180 5240 0.065
9 2 15E CC MO ND 5260 5320 0.071
9 3 15E CC MO ND 5500 5700 0.074
9 4 15E CC MO 5745 5825 0.07
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.007
10 2 15C CC MO 2412 2462 0.625
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E CC MO 5180 5240 0.065
11 2 15E CC MO ND 5260 5320 0.071
11 3 15E CC MO ND 5500 5700 0.074
11 4 15E CC MO 5745 5825 0.07
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 13.56000000 13.56000000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402 2480 0.007
13 2 15C CC MO 2412 2462 0.625
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15E 38 CC MO 5180 5240 0.065
15 2 15E 38 CC MO ND 5260 5320 0.071
15 3 15E 38 CC MO ND 5500 5700 0.074
15 4 15E 38 CC MO 5745 5825 0.07
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402 2480 0.007
17 2 15C CC MO 2412 2462 0.625
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E CC MO ND 5180 5240 0.071
19 2 15E CC MO ND 5260 5320 0.07
19 3 15E CC MO ND 5500 5700 0.076
19 4 15E CC MO ND 5745 5825 0.058
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402 2480 0.007
20 2 15C CC MO 2412 2462 0.625
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E 38 CC MO 5180 5240 0.071
22 2 15E 38 CC MO ND 5260 5320 0.07
22 3 15E 38 CC MO ND 5500 5700 0.076
22 4 15E 38 CC MO 5745 5825 0.058
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402 2480 0.008
23 2 15C CC MO 2412 2462 0.696
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 13.56000000 13.56000000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15E 38 CC MO 5180 5240 0.065
25 2 15E 38 CC MO 5260 5320 0.071
25 3 15E 38 CC MO 5500 5700 0.074
25 4 15E 38 CC MO 5745 5825 0.07
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2412 2462 0.625
27 2 15C CC 2402 2480 0.007
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E 38 CC MO 5180 5240 0.071
28 2 15E 38 CC MO ND 5260 5320 0.07
28 3 15E 38 CC MO ND 5500 5700 0.076
28 4 15E 38 CC MO 5745 5825 0.058
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC MO 2412 2462 0.696
30 2 15C CC 2402 2480 0.008
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15E 38 CC MO 5180 5240 0.046
31 2 15E 38 CC MO ND 5260 5320 0.07
31 3 15E 38 CC MO ND 5500 5580 0.076
31 4 15E 38 CC MO ND 5660 5700 0.07
31 5 15E 38 CC MO 5745 5825 0.542
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC MO 2412 2462 0.696
33 2 15C CC 2402 2480 0.008
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15E 38 CC MO 5180 5240 0.046
34 2 15E 38 CC MO ND 5260 5320 0.07
34 3 15E 38 CC MO ND 5500 5580 0.076
34 4 15E 38 CC MO ND 5660 5700 0.07
34 5 15E 38 CC MO 5745 5825 0.542
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC MO 2402 2480 0.008
35 2 15C CC MO 2412 2462 0.696
35 3 15C CC MO 5745 5825 0.542
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15E CC MO ND 5180 5240 0.046
37 2 15E CC MO ND 5260 5320 0.07
37 3 15E CC MO ND 5500 5580 0.076
37 4 15E CC MO ND 5660 5700 0.07
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402.00000000 2480.00000000 0.0090000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15E CC MO 5180 5240 0.046
39 2 15E CC MO ND 5260 5320 0.07
39 3 15E CC MO ND 5500 5580 0.076
39 4 15E CC MO ND 5660 5700 0.07
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 13.56000000 13.56000000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402 2480 0.008
41 2 15C CC MO 2412 2462 0.696
41 3 15C CC MO 5745 5825 0.542

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC